Influence of abutment materials on the implant-abutment joint stability in internal conical connection type implant systems.
- Author:
Jae Young JO
1
;
Dong Seok YANG
;
Jung Bo HUH
;
Jae Chan HEO
;
Mi Jung YUN
;
Chang Mo JEONG
Author Information
- Publication Type:Original Article
- Keywords: Preload; Interface stability; Abutment material; Implant; Compressive bending strength
- MeSH: Friction; Joints*; Titanium; Torque; Tungsten
- From:The Journal of Advanced Prosthodontics 2014;6(6):491-497
- CountryRepublic of Korea
- Language:English
- Abstract: PURPOSE: This study evaluated the influence of abutment materials on the stability of the implant-abutment joint in internal conical connection type implant systems. MATERIALS AND METHODS: Internal conical connection type implants, cement-retained abutments, and tungsten carbide-coated abutment screws were used. The abutments were fabricated with commercially pure grade 3 titanium (group T3), commercially pure grade 4 titanium (group T4), or Ti-6Al-4V (group TA) (n=5, each). In order to assess the amount of settlement after abutment fixation, a 30-Ncm tightening torque was applied, then the change in length before and after tightening the abutment screw was measured, and the preload exerted was recorded. The compressive bending strength was measured under the ISO14801 conditions. In order to determine whether there were significant changes in settlement, preload, and compressive bending strength before and after abutment fixation depending on abutment materials, one-way ANOVA and Tukey's HSD post-hoc test was performed. RESULTS: Group TA exhibited the smallest mean change in the combined length of the implant and abutment before and after fixation, and no difference was observed between groups T3 and T4 (P>.05). Group TA exhibited the highest preload and compressive bending strength values, followed by T4, then T3 (P<.001). CONCLUSION: The abutment material can influence the stability of the interface in internal conical connection type implant systems. The strength of the abutment material was inversely correlated with settlement, and positively correlated with compressive bending strength. Preload was inversely proportional to the frictional coefficient of the abutment material.
