Rational design of a 500 m3 fermenter for erythromycin production by Saccharopolyspora erythraea.
- Author:
Xin TAN
1
;
Chao LI
1
;
Meijin GUO
1
Author Information
- Publication Type:Journal Article
- Keywords: computational fluid dynamics; erythromycin fermentation; oxygen uptake rate; stirred tank bioreactor; time constant analysis
- MeSH: Erythromycin; Saccharopolyspora/genetics*; Bioreactors; Fermentation; Anti-Bacterial Agents
- From: Chinese Journal of Biotechnology 2022;38(12):4692-4704
- CountryChina
- Language:Chinese
- Abstract: Erythromycin is a macrolide antibiotic produced by Saccharopolyspora erythraea. Its yield is greatly affected by the fermentation conditions and the bioreactor configurations. In this study, a novel scale-up method for erythromycin fermentation was developed based on computational fluid dynamics (CFD) and time constant analysis. Firstly, the dissolved oxygen (DO) was determined as a key parameter according to the physiological properties of S. erythraea cultivated in a 50 L bioreactor. It was found that the time constant of oxygen supply (tmt) in a 500 m3 bioreactor should be less than 6.25 s in order to satisfy the organism's oxygen uptake rate (OUR). Subsequently, a 500 m3 bioreactor was designed using the time constant method combined with empirical correlations. The impeller combination with one BDT8 impeller at bottom and two MSX4 impellers at upper part was determined, and then validated by numerical simulation. The results indicated that the tmt of the bioreactor (< 6.25 s) and the fluid properties, including gas hold-up, shear stress and fluid vector, met the requirements of erythromycin fermentation. Finally, the industrial production of erythromycin in the 500 m3 showed the design method was applicable in large scale fermentation.
