Finite Element Analysis and in vitro Hemodynamic Testing of Polyester Textile Valves with Nitinol Wires
10.16156/j.1004-7220.2022.04.18
- VernacularTitle:含有镍钛合金丝的PET纺织瓣膜有限元分析及体外流体力学测试
- Author:
Yuqi CAO
1
;
Bowen ZHANG
2
;
Shiping CHEN
3
;
Shengzhang WANG
1
,
2
;
Lu WANG
3
;
Lai WEI
4
Author Information
1. Institute of Biomedical Engineering and Technology, Academy for Engineering and Technology, Fudan University
2. Institute of Biomechanics, Department of Aerospace, Fudan University
3. Key Laboratory of Biomedical Textile Materials and Technology in Textile Industry, College of Textiles, Donghua University
4. Department of Cardiology Surgery, Zhongshan Hospital Affiliated to Fudan University
- Publication Type:Journal Article
- Keywords:
prosthetic heart valve;
textile valve;
finite element analysis;
pulsatile flow testing
- From:
Journal of Medical Biomechanics
2022;37(4):E692-E698
- CountryChina
- Language:Chinese
-
Abstract:
Objective To study mechanical properties of polyethylene terephthalate (PET)-based textile valves woven with nickel-titanium (NiTi) wires by finite element method, and combined with in vitro hemodynamic testing, to analyze the effect of wire quantity and woven position on hemodynamic performance of PET textile valve. Methods The three-dimensional (3D) geometric models of PET valves without wires and models of PET valves with wires by different numbers and distributions in radial direction were constructed using modeling software. Material properties of PET valves and wires were given based on the literature and experimental data. The transvalvular pressure difference curves of PET valves obtained from in vitro pulsatile flow experiments were used as boundary conditions. Stress distributions of the valve during peak systole and diastole were studied by finite element analysis software. Hydrodynamic performance of the valve with wires was evaluated by in vitro pulsatile flow experiments. ResultsThe finite element analysis results showed that the radially woven NiTi wires could enhance support for the PET textile valve, and support force and area of the valve in belly region of the valve leaflet with evenly distributed metal wires increased with the number of metal wires. The situation of support force was similar for silk distributions on both sides of the belly. The weaving of wires reduced stress concentration on the PET textile valve to a certain extent. The pulsatile flow experiment results showed that the stability of opening and closing shapes, effective opening area (EOA), regurgitation fraction (RF) and transvalvular pressure differences for two kinds of the PET valves with woven wires were better than those of the PET valves without wires. Conclusions Weaving metal wires in radial direction of the PET textile valve can effectively reduce stress concentrations on the PET textile valve during the cardiac cycle, and reduce tearing possibility of the valve leaflet. The woven metal wires can improve opening and closing stability of PET textile valve in in vitro hydrodynamic test, increase EOA and reduce RF and transvalvular pressure difference of the PET valve.
