A shear bond strength of resin cement bonded to human uncut enamel, cut enamel, and dentin in vitro.
- Author:
Jong Yeop LEE
- Publication Type:In Vitro ; Original Article
- Keywords:
Shear bond strength;
Resin cement;
Uuncut enamel;
Cut enamel;
Dentin
- MeSH:
Adhesives;
Carbon;
Ceramics;
Dental Enamel*;
Dental Instruments;
Dentin*;
Dentistry;
Dentition;
Diamond;
Fungi;
Humans*;
Polymethyl Methacrylate;
Resin Cements*;
Silicones;
Tooth;
Water
- From:The Journal of Korean Academy of Prosthodontics
2003;41(3):319-324
- CountryRepublic of Korea
- Language:English
-
Abstract:
STATEMENT OF PROBLEM: Adhesives in dentistry play a major role in the success of restorative treatments. In the treatment of all ceramic restoration it is needed to find the adequate bond strength between enamel and dentin. PURPOSE: The purpose of this study was to evaluate shear bond strength of resin cement bonded to extracted human uncut enamel, cut enamel, and dentin in vitro. MATERIAL AND METHODS: Ten freshly extracted anterior teeth without any previous restorative treatments were chosen. The extracted teeth were embedded in PMMA cold acrylic in the shape of a cylinder, 25 mm in diameter by 25 mm in height. The bonding system used was as follow: Uni-Etch (32 % phosphoric acid), One-Step adhesive, Duolink resin cement. The specimens were acid etched and rinsed with water. Two layers of One-Step adhesive were coated with a disposable brush on the uncut enamel. VIP curing light at 500 mV/cm2 was used to cure the adhesive. For cut enamel shear bond test, the specimen used for uncut enamel was further reduced approximately 0.3 - 0.5 mm using a laminate preparation diamond bur (0.3 mm in depth). The specimens were subsequently treated with 320-grit SiC paper followed by 600-grit SiC paper and cleaned with distilled water. The bonding procedure on the cut enamel was same as uncut enamel bonding procedure. For dentin bonding test, the specimen used for cut enamel was further reduced approximately 0.5 mm ~ 1.0 mm using a laminate preparation diamond bur (0.5 mm in depth of diamond cutting). The amount of reduction was evaluated with the silicone mold. The specimens were subsequently treated with 320-grit SiC paper followed by 600-grit silicon carbon paper and cleaned in distilled water. The bonding procedure on the dentin was same as uncut enamel bonding procedure. All samples were mounted and secured on the Ultradent shear bond test sample holder, and Ultradent restricted shear bond testing device was used with Universal Instron machine until fracture. Analysis of variance (ANOVA) test was performed comparing the result at P<0.05. Multiple comparison (Tukey) was used to compare each groups. RESULT: The result showed that the mean value in shear bond strength of resin cement bonded to uncut enamel, cut enamel and dentin were 27.04 Mpa, 30.25 Mpa and 26.39 Mpa with respect. CONCLUSION: Within the limitation of this study, the mean value of the shear bond strength of cut enamel was higher than those of uncut enamel or dentin. However there existed no statistical differences between three different human dentition substrates due to increased adhesive characteristics.
