A study on surface of various abutment screws.
- Author:
Chan Ik PARK
;
Chae Heon CHUNG
;
Han Cheol CHOI
;
Dae Hwa BACK
- Publication Type:Original Article
- Keywords:
Screw loosening;
Screw surface treatment;
FESEM;
Scratch test
- MeSH:
Alloys;
Head;
Needles;
Polytetrafluoroethylene;
Titanium
- From:The Journal of Korean Academy of Prosthodontics
2003;41(3):351-359
- CountryRepublic of Korea
- Language:English
-
Abstract:
STATEMENT OF PROBLEM: Regardless of any restoration, most of case, we used in screw connection between abutment and implant. For this reason, implant screw loosening has been remained problem in restorative practices. PURPOSE: The purpose of this study was to compare surface of coated/plated screw with titanium and gold alloy screw and to evaluate physical property of coated/plated material after scratch test in FESEM investigation. MATERIAL AND METHODS: GoldTite, titanium screw provided by 3i (Implant Innovation, USA) and TorqTite, titanium screw by Steri-Oss (Nobel Biocare, USA) and gold screw, titanium screw by AVANA (Osstem Implant, korea) - were selected for this study. Each abutment screw surface was observed at 100 times, and then screw crest, root, and slope were done more detailed numerical value, at 1000 times with FESEM. A micro-diamond needle was also prepared for the scratch test. Each abutment screw was fixed, micro-diamond scratch the surface of head region was made at constant load and then was observed central region and periphery of fine trace through 1000 times with FESEM. RESULTS: The surface of GoldTite was smoother than that of other kinds of screw and had abundant ductility and malleability compared with titanium and gold screw. The scratch test also showed that teflon particles were exfoliated easily in screw coated with teflon. Titanium screw had a rough surface and low ductility. CONCLUSION: It was recommended that the clinical use of gold-plated screw would prevent a screw from loosening.
