A shear bond strength of resin cements bonded to pressable porcelain with various surface treatments.
- Author:
Jong Yeop LEE
;
Eui Bin IM
- Publication Type:Original Article ; Randomized Controlled Trial
- Keywords:
Pressable ceramic;
Porcelain surface treatment;
Resin cement system
- MeSH:
Adhesives;
Ceramics;
Dental Porcelain*;
Dentistry;
Resin Cements*;
Silicon Dioxide;
Water
- From:The Journal of Korean Academy of Prosthodontics
2003;41(3):379-386
- CountryRepublic of Korea
- Language:English
-
Abstract:
STATEMENT OF PROBLEM: Resin cements are widely used in adhesive dentistry specially on all ceramic restorations. It is needed to find out adequate bonding strength between different porcelain surface treatments, commercially available porcelains, and different resin cement systems. PURPOSE: The purpose of this study was to evaluate shear bond strength of resin cements bonded to porcelains in three different modalities; 5 different porcelain surface treatments, 3 different resin cement systems and 3 different commercially available pressable porcelains. MATERIAL AND METHOD: This study consisted of 3 parts. Part I examined the effect of five different surface treatments on the pressable porcelain. Fifty discs (5 mm in diameter and 3 mm in height) of Authentic porcelain were randomly divided into 5 groups (n = 10). The specimens were sanded with 320 grit SiC paper followed by 600 grit SiC paper. The specimens were treated as follow: Group 1-Sandblasting (aluminum oxide) only, Group 2 - sandblasting/silane, Group - sandblasting/acid etching/silane, Group 4 - acid etching only, Group 5 - acid etching/silane. Part II examined the shear bond strength of 3 different resin cement systems (Duolink, Variolink II, Rely X ARC) on acid etching/ silane treated Authentic pressable porcelain. Part 3 examined the shear bond strength of Duolink resin cement on 3 different pressable porcelains (Authentic, Empress I, Finesse). All cemented specimens were stored in distilled water for 2 hours and tested with Ultradent shear bond strength test jig under Universal Instron machine until fracture. An analysis of variance(ANOVA) test was used to evaluate differences in shear bond strength. RESULT: The shear bond strength test resulted in the following: (1) Acid etched porcelains recorded greater shear bond strength values to the sandblasted porcelains. (2) Silane treated porcelains recorded greater shear bond strength values to non-silane treated porcelains. (3) There was no significant difference between sandblasting/acid etching/silane teated and acid etching/silane treated porcelains. However those values were much higher than other three groups. (4) The shear bond strength with Variolink II was lower than the value of Duolink or Rely X ARC. (5) The shear bond strength of Finesse was lower than the value of Authentic or Empress I.
