Biomechanical modeling and experimental research of peripherally inserted venous catheter
10.3760/cma.j.cn121382-20201228-00303
- VernacularTitle:静脉留置针的生物力学建模与实验研究
- Author:
Hongwang ZHU
1
;
Saihui CUI
;
Yang XIANG
;
Haochen WANG
;
Zhihui ZHANG
;
Chengli SONG
Author Information
1. 上海理工大学医疗器械与食品学院 200093
- Keywords:
Peripherally inserted venous catheter;
Catheter folds;
Polyurethane;
Fluorinated ethylene propylene copolymer;
Finite element analysis
- From:
International Journal of Biomedical Engineering
2021;44(3):192-197
- CountryChina
- Language:Chinese
-
Abstract:
Objective:To conduct theoretical analysis and experimental research on peripherally inserted venous catheters, establish theoretical models of interaction between different materials catheters and simulated skin tissues, and test different catheters at the same time to provide theoretical basis and experimental basis for the optimization design.Methods:According to the mechanical properties of the catheter at 25 ℃ and 37 ℃, a finite element model of the catheter and simulate skin tissue was established. The relationship between catheter folds and material and structure during puncture was analyzed, and the stiffness, radiographic properties, etc. were tested experimentally.Results:The performance of the catheter at different temperatures is closely related to its material. The wrinkle situation of the catheter is related to the catheter material and the inclination of the wedge surface. The elastic modulus of the polyurethane (PU) catheter is about 500 MPa and 250 MPa, respectively at room temperature (25 ℃) and body temperature (37 ℃), which meets the clinical needs of high rigidity during puncture and soft material during indwelling. When the catheter structure is the same, the PU catheter is less prone to wrinkles than the fluorinated ethylene propylene copolymer (FEP) catheter. When the catheter material is the same, the smaller the inclination of the wedge surface, the less likely the catheter to wrinkle.Conclusions:Appropriately reducing the inclination of the wedge-shaped surface of the needle of peripherally inserted venous catheters can improve the success rate of puncture. The PU catheters have good mechanical properties, they are not prone to wrinkles during puncture, and their stiffness can be reduced at body temperature, which can not only increase the success rate of puncture, but also reduce the occurrence of complications. Therefore, PU catheters have a better clinical application prospect.
