Flexural strength and reliability of highly translucent colored zirconia
10.14368/jdras.2020.36.1.41
- Author:
Hyun-Jun KONG
1
Author Information
1. Department of Prosthodontics, College of Dentistry, Wonkwang University, Iksan, Republic of Korea
- Publication Type:Original Article
- From:Journal of Dental Rehabilitation and Applied Science
2020;36(1):41-47
- CountryRepublic of Korea
- Language:English
-
Abstract:
Purpose:The purpose of this study was to evaluate the flexural strength and reliability of highly translucent colored zirconia for all ceramic restoration.
Materials and Methods:Bar-shaped specimens (25 × 4 × 2.5 mm) were prepared from highly translucent monolithic zirconia. Three experimental groups were set up according to color (shade A0, A1, and A3). For each group, 20 specimens were prepared. Flexural strength was determined using a 3-point flexural test and results were analyzed with one-way ANOVA test. Weibull statistical analysis provided 2 parameter estimates: Weibull modulus and characteristic strength. X-ray diffraction (XRD) analysis was performed.
Results:There was statistically significant difference between uncolored (Shade A0) and colored (shade A1 and A3) (P < 0.05), but there was no difference between colored groups (P > 0.05). The uncolored group had higher reliability compared with colored study groups. On x-ray diffraction analysis of each group, typical peaks of tetragonal phase appeared in all groups.
Conclusion:Within the limitations of this in vitro study, coloring highly translucent zirconia had significant effect on flexural strength and reliability. Therefore, clinicians should be careful when using highly translucent colored zirconia to prevent breakage of veneering ceramic and enhance aesthetics.
