Evaluating the occupational exposure to hand-transmitted vibration in golf ball head grinding positions
10.11763/j.issn.2095-2619.2019.03.005
- Author:
Hansheng LIN
1
;
Danying ZHANG
1
;
Maosheng YAN
1
;
Bin XIAO
1
;
Hua YAN
1
;
Guoyong XU
1
;
Xiao ZHANG
1
;
Xinan WU
;
Pei HU
;
Qingsong CHEN
1
Author Information
1. Guangdong Province Hospital for Occupational Disease Prevention and Treatment,Guangdong Provincial Key Laboratory of Occupational Disease Prevention and Treatment Guangzhou,Guangdong 510300,China
- Publication Type:Journal Article
- Keywords:
Grinding;
Hand-transmitted vibration;
Occupational exposure;
Key control point;
Grading management;
Evaluation
- From:
China Occupational Medicine
2019;46(03):286-291
- CountryChina
- Language:Chinese
-
Abstract:
OBJECTIVE: To evaluate the exposure status of hand-transmitted vibration(HTV)in golf ball head grinding workers.METHODS: The golf ball head grinding positions in a sports equipment factory were selected as the research subjects by the judgement sampling method.The HTV exposure level of the workers in 66 grinding positions was measured,the key control points for HTV hazards were identified,and the damage of HTV was classified.RESULTS: The median(M)of 4 hours energy equivalent frequency-weighted acceleration to vibration[a_(hw(4))]of grinding positions in this sports equipment factory was 4.21 m/s~2,and the a_(hw(4)) over standard rate was 50.0%(33/66).The a_(hw(4)) of rough grinding positions was higher than that of fine grinding positions(M:5.50 v.s 3.94 m/s~2,P<0.05).In both rough grinding positions and fine grinding positions,the a_(hw(4)) of different ball head grinding types from high to low were hollow titanium alloy ball heads, hollow stainless steel ball heads,and solid stainless steel ball heads(rough grinding positions M:7.41 vs4.43 vs 3.11 m/s~2,P<0.01; fine grinding p ositions M:5.24 vs 4.21 vs 2.93 m/s~2,P<0.01).For the hollow titanium alloy ball head grinding positions,the a_(hw(4)) of rough grinding was higher than that of fine grinding(M:7.47 vs 5.24 m/s~2,P<0.01).Rough grinding positions,especially hollow stainless steel ball heads and hollow titanium alloy ball head grinding positions were key control points for HTV hazards.In the 66 grinding positions,the HTV hazards were classified as grade 0,Ⅰ,Ⅱ,and Ⅲ in the grinding positions accounted for 3.0%,47.0%,40.9%,and 9.1%,respectively,and those with grade Ⅱ and above were 50.0%(33/66). CONCLUSION: The exposure level of HTV in golf ball head grinding workers is high,with a trend of exceeding the standard.The golf ball head grinding workers have a high occupational health risk.
