Anatomical study of anterior occipitocervical fixation with clival screw and plate via transoral approach
10.3760/cma.j.cn121113-20200419-00273
- VernacularTitle:经口咽逐级扩大入路行斜坡置钉枕颈固定术的应用解剖学研究
- Author:
Wei JI
1
;
Junhao LIU
;
Zhiping HUANG
;
Zucheng HUANG
;
Qi LIU
;
Junyu LIN
;
Ruoyao LI
;
Xiuhua WU
;
Qingan ZHU
Author Information
1. 南方医科大学南方医院脊柱外科，广州 510515
- From:
Chinese Journal of Orthopaedics
2020;40(16):1089-1097
- CountryChina
- Language:Chinese
-
Abstract:
Objective:To evaluate the feasibility of the screw and plate for clival fixation using a transoral expanded approaches.Methods:The transoral expanded approaches were performed on craniocervical segment specimens obtained from 7 subjects, including transoral approach (TO), transoral with soft (TOP) or hard (TOHP) palate split, mandibulotomy (MO) and mandibuloglossotomy (MLO). The distribution and thickness of soft tissue, the configuration of the vertebral arteries, the distance between the midline and the vertebral arteries, the exposed area of the clivus and cervical spine, and the range of screw angle (the angle between the line from the lower incisor or the central base of the mandible to the exposed area of the clivus and the tangent line of the clivus) were evaluated.Results:The thickness of the soft tissue on the posterior pharyngeal wall above the clival pharyngeal nodules was 3.5±0.6 mm. That on the anterior C 1-C 5 vertebrae was 5.0±0.5 mm. The distances from the bilateral vertebral arteries to the midline was 19.5±1.2 mm at C 1, 2, 14.6±2.7 mm at C 2, 3, 14.0±2.7 mm at C 3, 4, and 13.9±2.7 mm at C 4, 5. For the TO approach, the longitudinal diameter of the exposed clivus was 8.3±3.0 mm. The distance from the lower incisor to the superior margin of the exposed clivus, the lower margin of the exposed clivus, the anterior arch of C 1, the vertebral body of C 2 and C 3 were 104.7±4.3 mm, 99.2±6.8 mm, 81.4±4.3 mm, 75.1±4.0 mm and 68.7±6.5 mm, respectively. Six specimens were exposed to the C 3, while one was exposed to the C 2. For the TOP approach, the longitudinal diameter of the exposed clivus was 18.5±4.8 mm. The distance from the lower incisor to the superior margin of the exposed clivus and the pharyngeal nodules were 107.9±6.7 mm and 104.8±6.7 mm, respectively. For the TOHP approach, the longitudinal diameter of the exposed clivus was 26.3±1.8 mm (the clival length) with distance from the lower incisor to the superior margin of the clivus 112.4±12.6 mm. For the MO/MLO approach, the entire clivus was exposed. The distance from the central base of the mandible to the superior and inferior margin of the exposed clivus and the pharyngeal nodules were 141.8±15.7 mm, 131.0±9.9 mm and 120.5±8.2 mm, respectively. The inferior margin of the exposed cervical vertebra was C 5, 6. The rate of the clival screw placement through anterior occipitocervical fixation using TO, TOP, TOHP, MO and MLO was 0%, 71% (5/7), 86% (6/7), and 100%, respectively. The screw angle was 99.0°±1.8°, 92.6°±7.7°, 92.6°±7.7°, 75.1°±7.7°, and 75.1°±7.7°, respectively. Conclusion:Occipitocervical fixation with clival screw and plate could be conducted in most cases via TOP and TOHP approaches. However, in some cases with small split-mouth or mouth opening limited, smaller clival screw angle caused by basilar impression or basilar invagination, requiring fixation and reconstruction of the lower cervical spine, and the MO/MLO approaches could be still required to achieve the fixation.
