Multi-element Ultrasound Applicator for the Treatment of Cancer in Uterus and Cervix.
- Author:
Rena LEE
1
Author Information
1. Department of Radiation Oncology, College of Medicine, Ewha Womans University, Seoul, Korea. renalee@ewha.ac.kr
- Publication Type:Original Article
- Keywords:
Ultrasound hyperthermia applicator for gynecologic cancer;
High dose rate brachytherapy
- MeSH:
Acoustics;
Brachytherapy;
Cervix Uteri*;
Electric Impedance;
Female;
Heating;
Hot Temperature;
Transducers;
Ultrasonography*;
Uterus*;
Vagina;
Water
- From:Korean Journal of Medical Physics
2005;16(1):16-23
- CountryRepublic of Korea
- Language:Korean
-
Abstract:
The objective of this study was to construct multi-element ultrasound applicators for the treatment of gynecologic cancer with high dose rate brachytherapy. For the treatment of uterus, piezo-ceramic crystal transducer (PZT-5A) with outer diameter of 4 mm, wall thickness of 1.3 mm, and length of 24.5 mm was selected. For the treatment of cervix or vagina, it should be possible to insert the applicator into the vagina. Thus, a cylindrical PZT-8 material with outer diameter of 24.5 mm, wall thickness of 1.3 mm, and length of 15.2 mm was selected. The operating frequencies determined by vector impedance measurement were 3.2 MHz for the PZT 5A cylinder (OD=4 mm) and 1.7 MHz for the PZT-8 cylinder (OD: 24.5 mm). The ratios of generated acoustic output power to applied electric power were 33% and 61% for the tandem type crystal and the cylinder type crystal, respectively. The radiated acoustic pressure fields from both transducers were calculated using a Matlab code and measured in water using hydrophone. There was good agreement between measured and calculated acoustic pressure field distribution. For a tandem type transducer, the calculated acoustic pressure field decreased from 0.023 MPa at 10 mm to 0.010 Mpa at 30 mm, the reduction of 57%. For the cylinder type transducer which will be used for the treatment of vagina showed 78% reduction at 15 mm and 66% at 25 mm as compared to values at 5 mm from the surface. Based on the characteristics of the transducers, this study demonstrated the possibility of using the crystals as a heating source. Finally, a 3-element and 4-element prototype applicators were constructed. The 3-element applicator is 75 mm long and 4 mm thick and will be used for the treatment of uterus. The 4-element applicator is 61 mm long and 24.5 mm thick and will be used for the treatment of vagina. Using these applicators, it is possible to generate enough power to increase temperature to therapeutic level.
