Hemodynamic comparison between elastic and rigid vessels for the central shunt
- VernacularTitle:中央分流术中血管弹性壁和刚性壁对血管中血流动力学的影响
- Author:
Feng WANG
1
;
You-jun LIU
1
;
Jing-li DING
1
;
Fan BAI
1
;
Xi ZHAO
1
;
Xiao-chen REN
1
Author Information
1. College of Life Science and Bio-engineering, Beijing University of Technology
- Publication Type:Journal Article
- Keywords:
Tetralogy of Fallot (TOF);
Fluid-structure interaction;
Central shunt (CS);
Hemodynamics
- From:
Journal of Medical Biomechanics
2013;28(6):E622-E628
- CountryChina
- Language:Chinese
-
Abstract:
Objective To study the hemodynamics of central shunt (CS) by numerical simulation and investigate the effects of the elastic and rigid vessel wall on distributions of hemodynamic parameters in the vessel. Methods Two idealized CS models were constructed, one with a rigid wall (the rigid model) and the other with an elastic wall (the elastic model). Numerical calculation was conducted by the finite element method, and the elastic model adopted the fluid structure interaction. Results The distribution of flow velocity and pressure in both models were generally the same. About 68.9% of the aortic blood was directed into the pulmonary artery for the rigid model, as compared to 70% for the elastic model. The pressure drops within the shunt for the elastic model and rigid model were about 7.668 8 kPa and 7.222 3 kPa, respectively. The maximum variation in the average cross sections along the shunt was about 2.2% for the elastic model, appearing at the proximal end to side (ETS) anastomosis. The maximum difference of wall shear stress (WSS) between the two models at five key regions of each was about 16.1%. Conclusions Generally, the global flow structure in both the CS models remains unchanged; the elasticity of the vessel wall slightly influenced the flow distributions and pressure drop of the shunt; the effect from elasticity of the vessel wall on average cross sections along the shunt was higher at the proximal ETS anastomosis than that at the distal ETS anastomosis; the hypothesis that the vessel wall is rigid is acceptable in CS numerical simulations for the treatment of tetralogy of Fallot (TOF). However, the coupling of flow dynamics and wall mechanics may lead to a more reliable simulation result in the CS.
