Micro-pore structure and mechanical properties of porous titanium scaffold using 3D print technology
10.16156/j.1004-7220.2017.03.08
- VernacularTitle:3D打印多孔钛支架微观孔隙结构和力学性能
- Author:
Chen-dong FENG
1
;
Yu XIA
1
;
Xiang LI
1
;
Cheng-tao WANG
1
Author Information
1. School of mechanical engineering，Shanghai Jiao Tong University
- Publication Type:Journal Article
- Keywords:
3D printing;
Selective laser melting;
Electron beam melting;
Porous Ti scaffold
- From:
Journal of Medical Biomechanics
2017;32(3):E256-E260
- CountryChina
- Language:Chinese
-
Abstract:
Objective To study the micro-pore architecture and mechanical properties of porous titanium scaffolds with diamond molecule structure produced by 3D print technology, so as to guide the development of 3D-prinited porous titanium orthopedic implants. Methods Selective laser melting (SLM) and electron beam melting (EBM) were used to fabricate porous Ti6Al4V scaffolds with diamond molecule structure. The micro-pore architectures of those scaffolds were observed using optical microscope and scanning electron microscope (SEM), and universal material testing machine was used to conduct compressive test on the scaffolds. Results Both SLM and EBM techniques had machining error and half-melted metal particles were found on the strut surface. The relative error of strut size produced by SLM and EMB was 20.9%-35.8% and －9.1%-46.8%, respectively. The scaffold with strut width of 0.2 mm could not be produced by EBM. The compressive strength and elastic modulus of the scaffold fabricated by SLM was 99.7-192.6 MPa and 2.43-4.23 GPa, respectively. The compressive strength and elastic modulus of the scaffold fabricated by SLM was 39.5-96.9 MPa and 1.44-2.83 GPa, respectively. Conclusions The manufacturing precision of SLM is higher than that of EBM. Porosity is the main factor that affects the compressive strength and elastic modulus of the scaffolds. In the same process, with the increase of porosity, both the compressive strength and elastic modulus decrease. When the porosities are similar, the scaffolds fabricated by SLM possess higher compressive strength and elastic modulus than those by SLM.
