Design of an axial blood pump of diffuser with splitter blades and cantilevered main blades.
10.7507/1001-5515.201801065
- Author:
Guangmao LIU
1
;
Jian XI
2
;
Haibo CHEN
1
;
Yan ZHANG
1
;
Jianfeng HOU
1
;
Jianye ZHOU
1
;
Hansong SUN
1
;
Shengshou HU
3
Author Information
1. State Key Laboratory of Cardiovascular Disease, Fuwai Hospital, National Center for Cardiovascular Diseases, Chinese Academy of Medical Sciences and Peking Union Medical College, Beijing 100037, P.R.China.
2. Zhonghang Electronic Measuring Instruments Co., Ltd, Xi'an 710000, P.R.China.
3. State Key Laboratory of Cardiovascular Disease, Fuwai Hospital, National Center for Cardiovascular Diseases, Chinese Academy of Medical Sciences and Peking Union Medical College, Beijing 100037, P.R.China.huss@fuwaihospital.org.
- Publication Type:Journal Article
- Keywords:
axial blood pump;
cantilevered main blade;
hemolysis index;
numerical simulation;
splitter blade
- MeSH:
China;
Computer Simulation;
Equipment Design;
Heart Failure;
therapy;
Heart-Assist Devices;
Hemolysis;
Humans;
Models, Cardiovascular
- From:
Journal of Biomedical Engineering
2019;36(3):379-385
- CountryChina
- Language:Chinese
-
Abstract:
An implantable axial blood pump was designed according to the circulation assist requirement of severe heart failure patients of China. The design point was chosen at 3 L/min flow rate with 100 mm Hg pressure rise when the blood pump can provide flow rates of 2-7 L/min. The blood pump with good hemolytic and anti-thrombogenic property at widely operating range was designed by developing a structure that including the spindly rotor impeller structure and the diffuser with splitter blades and cantilevered main blades. Numerical simulation and particle image velocimetry (PIV) experiment were conducted to analyze the hydraulic, flow fields and hemolytic performance of the blood pump. The results showed that the blood pump could provide flow rates of 2-7 L/min with pressure rise of 60.0-151.3 mm Hg when the blood pump rotating from 7 000 to 11 000 r/min. After adding the splitter blades, the separation flow at the suction surface of the diffuser has been reduced efficiently. The cantilever structure changed the blade gap from shroud to hub that reduced the tangential velocity from 6.2 m/s to 4.3-1.1 m/s in blade gap. Moreover, the maximum scalar shear stress of the blood pump was 897.3 Pa, and the averaged scalar shear stress was 37.7 Pa. The hemolysis index of the blood pump was 0.168% calculated with Heuser's hemolysis model. The PIV and simulated results showed the overall agreement of flow field distribution in diffuser region. The blood damage caused by higher shear stress would be reduced by adopting the spindle rotor impeller and diffuser with splitter blades and cantilevered main blades. The blood could flow smoothly through the axial blood pump with satisfactory hydraulics performance and without separation flow.
