Analysis of Overall Setup Accuracy Using On-Board Imager(R).
- Author:
Sun Young MA
1
;
Sangwook LIM
;
Sooman KANG
;
Tae Sig JEUNG
Author Information
1. Department of Radiation Oncology, Kosin University College of Medicine, Busan, Korea. jtsig@kosin.ac.kr
- Publication Type:Original Article
- Keywords:
On-board imager;
2D/2D matching;
Setup error
- MeSH:
Arm;
Displacement (Psychology);
Humans;
Hypogonadism;
Linear Energy Transfer;
Mitochondrial Diseases;
Ophthalmoplegia
- From:Korean Journal of Medical Physics
2011;22(2):67-71
- CountryRepublic of Korea
- Language:English
-
Abstract:
We evaluated the overall setup accuracy for the On-Board Imager (OBI, Varian Medical Systems Inc., Palo Alto, CA, USA), with attention to the laser, the gantry, and operator performance. We let experienced technicians place the marker block on the couch using a lock bar system, with alignment to the isocenter of the laser, every morning. A pair of radiographic images of the marker block was acquired at 0degrees and 270degrees angles to the kV arm to correct the position using a 2D/2D matching technique. Once the desired match was achieved, the couch was moved remotely to correct the setup error and the parameters were saved. The average for the vertical and the longitudinal displacements were 0.65 mm and 0.66 mm, and 0.01 mm for the lateral displacement. The average for the vertical and longitudinal displacements were statistically significant at the 0.05 level (p value=0.000 for both), while the p value for the lateral direction was 0.829. These results show that the tendencies to displacement in vertical and longitudinal directions occur through systematic error, while systematic error was not found in the lateral displacement. This daily overall evaluation is practical and easy to find the systematic and random errors in the setup system; however, a daily QA for laser and OBI alignment is still needed to minimize the systematic error in aligning patients.
