Effects of Different Angles of the Traction Table on Lumbar Spine Ligaments: A Finite Element Study.
10.4055/cios.2017.9.4.480
- Author:
Hekmat FARAJPOUR
1
;
Nima JAMSHIDI
Author Information
1. Department of Biomedical Engineering, Faculty of Engineering, University of Isfahan, Isfahan, Iran. n.jamshidi@eng.ui.ac.ir
- Publication Type:Original Article
- Keywords:
Low back pain;
Viscoelastic;
Prony series;
Maxwell model;
Ligaments
- MeSH:
Body Weight;
Female;
Humans;
Intervertebral Disc;
Ligaments*;
Longitudinal Ligaments;
Low Back Pain;
Magnetic Resonance Imaging;
Spine*;
Traction*;
Volunteers;
Zygapophyseal Joint
- From:Clinics in Orthopedic Surgery
2017;9(4):480-488
- CountryRepublic of Korea
- Language:English
-
Abstract:
BACKGROUND: The traction bed is a noninvasive device for treating lower back pain caused by herniated intervertebral discs. In this study, we investigated the impact of the traction bed on the lower back as a means of increasing the disc height and creating a gap between facet joints. METHODS: Computed tomography (CT) images were obtained from a female volunteer and a three-dimensional (3D) model was created using software package MIMICs 17.0. Afterwards, the 3D model was analyzed in an analytical software (Abaqus 6.14). The study was conducted under the following traction loads: 25%, 45%, 55%, and 85% of the whole body weight in different angles. RESULTS: Results indicated that the loading angle in the L3–4 area had 36.8%, 57.4%, 55.32%, 49.8%, and 52.15% effect on the anterior longitudinal ligament, posterior longitudinal ligament, intertransverse ligament, interspinous ligament, and supraspinous ligament, respectively. The respective values for the L4–5 area were 32.3%, 10.6%, 53.4%, 56.58%, and 57.35%. Also, the body weight had 63.2%, 42.6%, 44.68%, 50.2%, and 47.85% effect on the anterior longitudinal ligament, posterior longitudinal ligament, intertransverse ligament, interspinous ligament, and supraspinous ligament, respectively. The respective values for the L4–5 area were 67.7%, 89.4%, 46.6%, 43.42% and 42.65%. The authenticity of results was checked by comparing with the experimental data. CONCLUSIONS: The results show that traction beds are highly effective for disc movement and lower back pain relief. Also, an optimal angle for traction can be obtained in a 3D model analysis using CT or magnetic resonance imaging images. The optimal angle would be different for different patients and thus should be determined based on the decreased height of the intervertebral disc, weight and height of patients.
