The effect of zirconia surface architecturing technique on the zirconia/veneer interfacial bond strength
10.4047/jap.2018.10.4.259
- Author:
Soo Bok HER
1
;
Kyoung Hun KIM
;
Sang Eun PARK
;
Eun Jin PARK
Author Information
1. Seoul Meerae Dental Clinic, Seoul, Republic of Korea.
- Publication Type:Original Article
- Keywords:
Zirconia;
Zirconia surface architecturing technique (ZSAT);
Scratch test;
Tensile strength test
- MeSH:
Ceramics;
Dental Porcelain;
Tensile Strength
- From:The Journal of Advanced Prosthodontics
2018;10(4):259-264
- CountryRepublic of Korea
- Language:English
-
Abstract:
PURPOSE: The purpose of this study was to evaluate the effect of the zirconia surface architecturing technique (ZSAT) on the bond strength between veneering porcelain and zirconia ceramic. MATERIALS AND METHODS: 20 sintered zirconia ceramic specimens were used to determine the optimal surface treatment time, and were randomly divided into 4 groups based on treatment times of 0, 1, 2, and 3 hours. After etching with a special solution, the surface was observed under scanning electron microscope, and then the porcelain was veneered for scratch testing. Sixty 3 mol% yttria-stabilized tetragonal zirconia polycrystal ceramic blocks were used for tensile strength testing; 30 of these blocks were surface treated and the rest were not. Statistical analysis was performed using ANOVA, the Tukey post-hoc test, and independent t-test, and the level of significance was set at α=.05. RESULTS: The surface treatment of the zirconia using ZSAT increased the surface roughness, and tensile strength test results showed that the ZSAT group significantly increased the bond strength between zirconia and veneering porcelain compared to the untreated group (36 MPa vs. 30 MPa). Optimal etching time was determined to be 2 hours based on the scratch test results. CONCLUSION: ZSAT increases the surface roughness of zirconia, and this might contribute to the increased interfacial bond strength between zirconia and veneering porcelain.
