Sapstain and Mold Control on Radiata Pine Lumber: Laboratory and Field Tests of Selected Fungicides.
- Author:
Jae Jin KIM
1
;
Jong Bum RA
;
Hyung Jun KIM
;
Gyu Hyeok KIM
Author Information
1. Department of Wood Science, University of British Columbia, Vancouver, B.C. Canada V6T 1Z4.
- Publication Type:Original Article
- Keywords:
Fungal discoloration;
Fungicides;
Mold;
Radiata pine;
Sapstain
- MeSH:
Colon;
Fungi*;
Seasons
- From:Mycobiology
2002;30(1):37-40
- CountryRepublic of Korea
- Language:English
-
Abstract:
The susceptibility of radiata pine sapwood to fungal attack and the ability of selected fungicides to control colonization of sapstain and mold fungi on green radiata pine sapwood were evaluated. Radiata pine sapwood was highly susceptible to fungal staining, suggesting that prompt application of fungicides after sawing is essential for preventing fungal colonization. The ability of commercial fungicides to prevent fungal discoloration on radiata pine sapwood was assessed using an accelerated 6-week test on small samples in the laboratory, and in field tests using bulk-piled boards exposed outdoors for 6 weeks during summer rainy season. In laboratory tests, Hylite extra provided excellent protection against fungal discoloration even at the lowest concentrations. Hylite clear, Britewood S, and NP-1 Plus provided good short-term protection (2 to 4 weeks), but higher chemical loadings were required for long-term protection (6 weeks). Woodguard produced little or no protection over the test periods. In field tests, Kathon 893 provided markedly superior protection at the concentration of 0.5 percent or higher. NP-1 Plus provided relatively good protection at all concentrations evaluated. Hylite extra was effective only for short-term protection (2 to 4 weeks) at all concentrations tested, but higher solution strengths were needed for long-term protection.
