Stress relaxation mechanics characteristics of femoral prosthesis after simulating hip replacement
10.3969/j.issn.2095-4344.0035
- VernacularTitle:模拟髋关节置换后股骨假体应力松弛的力学特性分析
- Author:
Gang WANG
1
;
Xin-Ying LI
;
Shu-Quan ZHANG
;
Ya-Jun LI
Author Information
1. 内蒙古民族大学附属医院骨科
- From:
Chinese Journal of Tissue Engineering Research
2018;22(3):385-391
- CountryChina
- Language:Chinese
-
Abstract:
BACKGROUND: The previous biomechanical study of hip and hip replacement mostly analyzed the compressive, flexural and torsional mechanical properties and the three-dimensional finite element mechanics after prosthesis placement. There are few reports about the stress relaxation characteristics after femoral implant replacement. OBJECTIVE: To compare and analyze two kinds of artificial prostheses after hip replacement from the angle of rheology by simulating femoral stress relaxation experiment so as to provide stress relaxation characteristics parameters. METHODS: Eight femoral samples were randomly selected as the conventional prosthesis group. The specimen was fixed to the operation platform. The specimens were taken from the part of 1.5 cm above trochanter minor to trochanter major. After removal of the femoral head and most of the femoral neck, cancellous bone distal to the femoral section was removed. Medullary cavity was dredged from the distal side of trochanter major to determine the position of medullary cavity. The medullary cavity hammer was used to expand the medullary cavity. The detritus inside was removed. An additional eight femoral specimens were randomly taken for femoral neck prosthesis group. Two groups of samples were placed on the workbench, and experiment was conducted at increased strain speed of 50%/min. The time was set at 7 200 s, and 100 data were collected. RESULTS AND CONCLUSION: (1) Stress relaxation amount was 0.384 MPa at 7 200 s in normal femur as previously reported. The stress relaxation amount was 0.379 MPa and 0.362 MPa in the conventional prosthesis group and femoral neck prosthesis group. The stress relaxation amount was significantly larger in the femoral neck prosthesis group than in the conventional prosthesis group at 7 200 s (P < 0.05). (2) Two groups of stress relaxation data were obtained and stress relaxation equation was established by three parameters of the model. It is conducive to clarify the stress relaxation characteristics of different implants into the femur. (3) Femoral neck prosthesis group and conventional prosthesis group have different stress relaxation mechanics. Due to the retention of the femoral neck, less impact was found on the stress relaxation mechanics.
