The effect of denture base surface pretreatments on bond strengths of two long term resilient liners.
- Author:
Rahul Shyamrao KULKARNI
1
;
Rambhau PARKHEDKAR
Author Information
- Publication Type:Original Article
- Keywords: Resilient liners; Bond strength
- MeSH: Aluminum Oxide; Collodion; Denture Bases; Dentures; Dimethylpolysiloxanes; Polymethyl Methacrylate; Silicone Elastomers; Tensile Strength
- From:The Journal of Advanced Prosthodontics 2011;3(1):16-19
- CountryRepublic of Korea
- Language:English
- Abstract: PURPOSE: Purpose of this study was to evaluate effect of two surface treatments, sandblasting and monomer treatment, on tensile bond strength between two long term resilient liners and poly (methyl methacrylate) denture base resin. MATERIALS AND METHODS: Two resilient liners Super-Soft and Molloplast-B were selected.Sixty acrylic resin (Trevalon) specimens with cross sectional area of 10x10 mm were prepared and divided into two groups of 30 specimens each. Each group was surface treated (n = 10) by sandblasting (250 micro alumina particles), monomer treatment (for 180 sec) and control (no surface treatment). Resilient liners were processed between 2 poly(methyl methacrylate) surfaces, in the dimensions of 10x10x3 mm. Tensile strength was determined with Instron Universal testing machine, at a crosshead speed of 5 mm/min; and the modes of failure (adhesive, cohesive or mixed) were recorded. The data were analyzed using one-way ANOVA, followed by Tukey HSD test (alpha = 0.05). RESULTS: Monomer pretreatment of acrylic resin produced significantly higher bond strengths when compared to sandblasting and control for both resilient liners (P < .001). Sandblasting significantly decreased the bond strength for both the liners when compared to monomer pretreatment and control (P < .001). Mean bond strength of Super-Soft lined specimens was significantly higher than Molloplast-B in various surface treatment groups (P < .05). CONCLUSION: Surface pretreatment of the acrylic resin with monomer prior to resilient liner application is an effective method to increase bond strength between the base and soft liner. Sandblasting, on the contrary, is not recommended as it weakens the bond between the two.
