Effect of intermediate resin hydrophilicity on bond strength of single step adhesive.
10.5395/JKACD.2007.32.5.445
- Author:
Yong Sung KIM
1
;
Sang Hyuk PARK
;
Gi Woon CHOI
;
Kyoung Kyu CHOI
Author Information
1. Department of Conservative Dentistry, Division of Dentistry, Graduate of Kyung Hee University, Korea. choikkyu@khu.ac.kr
- Publication Type:Original Article
- Keywords:
New Single step system;
Intermediate resin;
Light cured;
Filled;
Hydrophobic;
Initial bond strength
- MeSH:
Adhesives*;
Hydrophobic and Hydrophilic Interactions*;
Permeability
- From:Journal of Korean Academy of Conservative Dentistry
2007;32(5):445-458
- CountryRepublic of Korea
- Language:Korean
-
Abstract:
The purpose of this study was to evaluate the bond strength of a new Single step system with different curing mode composites, and to evaluate the effect of the intermediate resins which have different hydrophilicity on bonding ability by means of the micro shear bond testing and TEM examination for the adhesive interface. The adhesive used in this study was an experimental single step system (Bisco Inc., Schaumburg, IL). Experimental groups were produced by using six kinds of intermediate resin having different hydrophilicity that was hydrophilic, hydrophobic and most hydrophobic resin and as filled or not after applying adhesive. Each experimental group was further divided into two subgroups whether the adhesive was light cured or not. Dual cured composite (Bis Core, Bisco Ltd., Schaumburg, IL) was placed on the adhesive layer as light cure or self cure mode. The results of bond strength were statistically analyzed using one way ANOVA and multiple comparisons are made using Tukey's test at alpha < 0.05 level. The results of this study were as follows; 1. The application of intermediate resin did not increase the bond strength for light cured composite. 2. The bond strength of an experimental adhesive with self cured composite was significantly increased by the application of intermediate resin layer. 3. The bond strength of adhesive was irrespective of the cure or not of itself before intermediate resin layer applied. 4. As applied hydrophilic resin layer was, the initial bond strength was higher than both hydrophobic and most hydrophobic one used but there was no significance. Using a single step adhesive with dual/self cured composite, the incompatibility between both of them should be solved by the application of intermediate hydrophobic resin to reduce the adhesive permeability. However, Single step adhesive can be used in the light cured composite restoration without any decrease of the initial bond strength.
