Factors influencing primary stability of miniplate anchorage: a three-dimensional finite element analysis.
10.4041/kjod.2008.38.5.304
- Author:
Nam Ki LEE
1
;
Dong Soon CHOI
;
In San JANG
;
Bong Kuen CHA
Author Information
1. Department of Orthodontics, School of Dentistry, Kangnung National University, Korea. ortho0328@hanmail.net
- Publication Type:Original Article
- Keywords:
Miniplate;
Anchorage;
Primary stability;
Finite element analysis
- MeSH:
Axis, Cervical Vertebra;
Displacement (Psychology);
Finite Element Analysis;
Traction
- From:Korean Journal of Orthodontics
2008;38(5):304-313
- CountryRepublic of Korea
- Language:Korean
-
Abstract:
OBJECTIVE: The purpose of this study was to evaluate the stress distribution in bone and displacement distribution of the miniscrew according to the length and number of the miniscrews used for the fixation of miniplate, and the direction of orthodontic force. METHODS: Four types of finite element models were designed to show various lengths (6 mm, 4 mm) and number (3, 2) of 2 mm diameter miniscrew used for the fixation of six holes for a curvilinear miniplate. A traction force of 4 N was applied at 0degrees, 30degrees, 60degrees and 90degrees to an imaginary axis connecting the two most distal unfixed holes of the miniplate. RESULTS: The smaller the number of the miniscrew and the shorter the length of the miniscrew, the more the maximum von Mises stress in the bone and maximum displacement of the miniscrew increased. Most von Mises stress in the bone was absorbed in the cortical portion rather than in the cancellous portion. The more the angle of the applied force to the imaginary axis increased, the more the maximum von Mises stress in the bone and maximum displacement of the miniscrew increased. The maximum von Mises stress in the bone and maximum displacement of the miniscrew were measured around the most distal screw-fixed area. CONCLUSIONS: The results suggest that the miniplate system should be positioned in the rigid cortical bone with 3 miniscrews of 2 mm diameter and 6 mm length, and its imaginary axis placed as parallel as possible to the direction of orthodontic force to obtain good primary stability.
