Shear bond strength and debonding failure mode of ceramic brackets according to the surface treatment of porcelain.
- Author:
Jeong Nam LEE
1
;
Cheol Won LEE
Author Information
1. Department of Dentistry, Catholic University Medical College, Seoul, Korea.
- Publication Type:Original Article ; Randomized Controlled Trial
- Keywords:
porcelain;
shear bond strength;
ceramic bracket
- MeSH:
Ceramics*;
Dental Porcelain*
- From:Korean Journal of Orthodontics
1998;28(5):803-812
- CountryRepublic of Korea
- Language:Korean
-
Abstract:
The purpose of this study was to evaluate the shear bond strength and failure mode of ceramic brackets according to the surface treatment of porcelain. Sixty porcelain samples were randomly divided into six groups of ten samples. Then they were treated as follows: Group 1(silane only), Group 2(etching + silane), Group 3(stone + silane), Group 4 (sandblasting + silane), Group 5(stone + etching + silane), Group 6(sandblasting + etching + silane) After surface treatment of porcelain, sixty Transcend 6000 brackets were bonded to the prepared porcelain surface and they were stored in 37 degrees C saline for 24 hours. An Instron universal testing machine was used to test the shear bond strength of ceramic brackets to porcelain. After debonding, bases of ceramic brackets and porcelain surfaces were examined under scanning electron microscope(SEM) to determine failure mode. Statistical analysis of the data was carried out with one-way ANOVA and Duncan's multiple range test. The results were as follows: 1. The shear bond strength of surface-treated groups 2 to 6 was higher than that of only silane-treated group 1, and there was statistical significance. (P<0.05) 2. There was no significant difference among the groups 3 to 6. (P <0.05) 3. The shear bond strength of etching-surface treated group 2 was significantly lower than those of sandblasting-surface treated group 4, complex surface treated group 5 and group 6. 4. According to the scanning electromicroscopic images, the surface roughness of sandblasting-surface treated group 4 was less than those of the group 5 and 6, but there was no significant difference in the shear bond strength. (P >0.05) As a conclusion we can have a clinically adequate bond strength when an application of silane is done after the treatment of porcelain surface with more than one way to bond ceramic bracket on the porcelain. Also, it is considered that the sandblasting and application of silane is effective for the simplication and convenience of the treatment.
