Comparison of bracket bond strength in various directions of force.
- Author:
Hyun Jung LEE
1
;
Hyung Soon LEE
;
Young Mi JEON
;
Jong Ghee KIM
Author Information
1. Department of Orthodontcis, School of Dentistry, Institute of Oral Bioscience, Chonbuk National University, Korea. kjgortho@moak.chonbuk.ac.kr
- Publication Type:Original Article
- Keywords:
Tensile bond strength;
Shear bond strength;
Peel bond strength
- MeSH:
Adhesives;
Orthodontic Brackets;
Tensile Strength
- From:Korean Journal of Orthodontics
2003;33(5):359-370
- CountryRepublic of Korea
- Language:Korean
-
Abstract:
The purpose of this study was to evaluate the bond strength of orthodontic brackets bonded to metal bar with chemically cured adhesive (Ortho-one, Bisco Co, USA) in various types and directions of force application. Three types of metal bracket with different bracket base configurations; Micro-Loc base(Tomy Co, Japan), Chessboard base(Daesung Co, Korea), Non-etched Foil-Mesh base(Dentaurum, Germany); were used in this study. Peel, shear, tensile bond strengths were measured by universal testing machine and compared each other. The peel force directions applied were 0degrees, 15degrees, 30degrees, 45degrees, 60degrees, 75degrees, 90degrees. And then, in consideration of the different surface area of the bracket bases, the bond strength per unit area were calculated and compared. The results obtained were summarized as follows : 1. The bond strengths according to the types and the directions of the forces were greatest at the shear forces in all three bracket base configuration groups(p < 0.01). 2. As the peel force direction grew higher in degree, peel bond strength decreased. The patterns of peel bond strength change according to force direction was similar in all three bracket base configurations. The minimum bond strength was 60 degree-peel bond strengths in all three bracket base configurations. 3. In Micro-Loc base group, minimum peel bond strength(60PBS) was in 29% level of shear bond strength and 52% level of tensile bond strength. In Chessboard base group, 60PBS was in 34% level of shear bond strength and 61% level of tensile bond strength. In Non-etched Foil-Mesh base group, 60PBS was in 34% level of shear bond strength and 55% level of tensile bond strength. 4. The bond strengths per unit area were lowest in Non-etched Foil-Mesh base group and highest in Chessboard base group(p < 0.05). However, there were no differences in shear bond strength, tensile bond strength, 75PBS and 90PBS per unit area between Micro-Loc and Chessboard base groups.
