Three-dimensional finite element analysis for stress distribution on the diameter of orthodontic mini-implants and insertion angle to the bone surface.
- Author:
Na Young BYOUN
1
;
Eun Hye NAM
;
Young Ah YOON
;
Il Kyu KIM
Author Information
1. Department of Dentistry, Inha University Hospital, 7-206 Shin-Heung Dong 3 Ga, Chung-Gu, Inchoen, Korea. orthoyoun@hanmail.net
- Publication Type:Original Article
- Keywords:
Stress distribution;
Orthodontic mini-implant;
Diameter;
Insertion angle
- MeSH:
Finite Element Analysis*;
Head
- From:Korean Journal of Orthodontics
2006;36(3):178-187
- CountryRepublic of Korea
- Language:Korean
-
Abstract:
The present study was performed to evaluate the stress distribution on the diameter of the mini-implant and insertion angle to the bone surface. To perform three dimensional finite element analysis, a hexadron of 15 x 15 x 20 mm3 was used, with a 1.0 mm width of cortical bone. Mini-implants of 8 mm length and 1.2 mm, 1.6 mm, and 2.0 mm in diameter were inserted at 90 degrees, 75 degrees, 60 degrees, 45 degrees, and 30 degrees to the bone surface. Two hundred grams of horizontal force was applied to the center of the mini-implant head and stress distribution and its magnitude were analyzed by ANSYS, a three dimensional finite element analysis program. The findings of this study showed that maximum von Mises stresses in the mini-implant and cortical and cancellous bone were decreased as the diameter increased from 1.2 mm to 2.0 mm with no relation to the insertion angle. Analysis of the stress distribution in the cortical and cancellous bone showed that the stress was absorbed mostly in the cortical bone, and little was transmitted to the cancellous bone. The contact area increased according to the increased diameter and decreased insertion angle to the bone surface, but maximum von Mises stress in cortical bone was more significantly related with the contact point of the mini-implant into the cortical bone surface than the insertion angle to the bone surface. The above results suggest that the maintenance of the mini-implant is more closely related with the diameter and contact point of the mini-implant into the cortical bone surface rather than the insertion angle.
