A bench-top micro-CT capable of simulating head motions.
10.1007/s13534-017-0023-6
- Author:
Mohamed A A HEGAZY
1
;
Mohamed Elsayed ELDIB
;
Yang Ji MUN
;
Myung Hye CHO
;
Min Hyoung CHO
;
Soo Yeol LEE
Author Information
1. Department of Biomedical Engineering, Kyung Hee University, 1732 Deogyeong-daero, Yongin-si, Gyeonggi-do 446-701, Republic of Korea. sylee01@khu.ac.kr
- Publication Type:Original Article
- Keywords:
Bench-top micro-CT;
Digital dentistry;
Motion artifact;
Motion simulation;
Dental-CT
- MeSH:
Artifacts;
Dentistry;
Head*;
Humans;
Tomography, X-Ray Computed
- From:
Biomedical Engineering Letters
2017;7(3):237-244
- CountryRepublic of Korea
- Language:English
-
Abstract:
Computational three-dimensional (3D) models of a dental structure generated from 3D dental computed tomography (CT) images are now widely used in digital dentistry. To generate precise 3D models, high-resolution imaging of the dental structure with a dental CT is required. However, a small head motion of the patient during the dental CT scan could degrade the spatial resolution of CT images to the extent that digital dentistry is no longer possible. A bench-top micro-CT has been built to evaluate the head motion effects on the dental CT images. A micro-CT has been built on an optic table with a micro-focus x-ray source and a flat-panel detector. A rotation stage, placed in between the x-ray source and the detector, is mounted on two-directional goniometers that can rotate the rotation stage in two orthogonal directions while the rotation stage is performing the CT scan. The goniometers can make object motions of an arbitrary waveform to simulate head tilting or head nodding. CT images of a phantom have been taken with and without introducing the motions, and the motion effects on the CT images have been evaluated. Object motions parallel to the detector plane have greater effects on the CT images than those against the detector plane. With the bench-top micro-CT, the motion effects have been visually seen at a tiny rotational motion as small as 0.3°. The bench-top micro-CT can be used to evaluate head motion effects on the dental CT images. The projection data, taken with the motion effects, would be used to develop motion artifact correction methods for a high-resolution dental-CT.
