Emission Rate of Formaldehyde in Artificial Woodiness Boards
- VernacularTitle:木质人造板材的甲醛释放量
- Author:
Bin FU
;
Ruijin SONG
;
Yuanqiang WU
- Publication Type:Journal Article
- Keywords:
Air pollution, indoor;
Formaldehyde;
Wooden board
- From:
Journal of Environment and Health
1992;0(04):-
- CountryChina
- Language:Chinese
-
Abstract:
Objective To understand the emission rate and the attenuation rule of formaldehyde in the artificial woodiness boards for sell in China and to study the efficiency of formaldehyde-eliminator. Methods With the small Climate-Chamber and 4160 formaldehyde-analyzer, quantity of formaldehyde released from some kinds of woodiness boards was analyzed under the different condition of temperature, relative humidity and ventilation cycle. Results The emission rate of formaldehyde in most veneers was over 1.2 mg/(m2?h), in most of moderate density fibreboard, it was 0.7～1.0 mg/(m2?h) and in the veneer for medical application, it was 0.3～0.9 mg/(m2?h). Formaldehyde emission rates of all the three kinds of woodiness boards investigated in the present study showed a fall of 75% in a period of time after made, and met the National Standard of China. The formaldehyde eliminator could reduce the emission rate of formaldehyde remarkably, however the effect perhaps weakened in a short time. Conclusion The formaldehyde emission rates in all kinds of woodiness boards investigated in the present paper are different, they exceed the National Standard of China while the boards made immediately and will reduce after 10-15 days in a given condition. The formaldehyde eliminator used in the study shows a remarkable effect but lasts only a short time.
