A comparative study on the bond strength of porcelain to the millingable Pd-Ag alloy.
- Author:
Jun Tae HONG
1
;
Soo Yeon SHIN
Author Information
- Publication Type:Comparative Study ; Original Article
- Keywords: Metal ceramic alloys; Palladium-silver alloy; Bending test; Porcelain bond strength
- MeSH: Alloys*; Dental Porcelain*; Esthetics; Metal Ceramic Alloys
- From:The Journal of Advanced Prosthodontics 2014;6(5):372-378
- CountryRepublic of Korea
- Language:English
- Abstract: PURPOSE: The porcelain fused to gold has been widely used as a restoration both with the natural esthetics of the porcelain and durability and marginal fit of metal casting. However, recently, due to the continuous rise in the price of gold, an interest towards materials to replace gold alloy is getting higher. This study compared the bond strength of porcelain to millingable palladium-silver (Pd-Ag) alloy, with that of 3 conventionally used metal-ceramic alloys. MATERIALS AND METHODS: Four types of metal-ceramic alloys, castable nonprecious nickel-chrome alloy, castable precious metal alloys containing 83% and 32% of gold, and millingable Pd-Ag alloy were used to make metal specimens (n=40). And porcelain was applied on the center area of metal specimen. Three-point bending test was performed with universal testing machine. The bond strength data were analyzed with a one-way ANOVA and post hoc Scheffe's tests (alpha=.05). RESULTS: The 3-point bending test showed the strongest (40.42 +/- 5.72 MPa) metal-ceramic bond in the nonprecious Ni-Cr alloy, followed by millingable Pd-Ag alloy (37.71 +/- 2.46 MPa), precious metal alloy containing 83% of gold (35.89 +/- 1.93 MPa), and precious metal alloy containing 32% of gold (34.59 +/- 2.63 MPa). Nonprecious Ni-Cr alloy and precious metal alloy containing 32% of gold showed significant difference (P<.05). CONCLUSION: The type of metal-ceramic alloys affects the bond strength of porcelain. Every metal-ceramic alloy used in this study showed clinically applicable bond strength with porcelain (25 MPa).
