Development of Solenoid RF Coil for Animal Imaging in 3T High Magnetic Field MRI.
- Author:
Hong Seok LEE
1
;
Dong Cheol WOO
;
Kwang Hong MIN
;
Yong Kwon KIM
;
Heung Kyu LEE
;
Bo Young CHOE
Author Information
1. College of Medicine, The Catholic University of Korea.
- Publication Type:Original Article
- Keywords:
RF coil;
solenoid coil;
birdcage coil;
SNR;
Q-factor
- MeSH:
Animals*;
Magnetic Fields*;
Magnetic Resonance Imaging*;
Rats;
Wind
- From:Journal of the Korean Society of Magnetic Resonance in Medicine
2007;11(1):20-26
- CountryRepublic of Korea
- Language:Korean
-
Abstract:
PURPOSE: The purpose of the present study was to develop and optimize solenoid coil for animal- model in 3 T MRI system and investigate and compare with the birdcage coil concerning the image quality with the various parameters such as SNR and Q-factor. MATERIALS AND METHODS: Solenoid coil for animal-model was made on the acryl structure (diameter 4 cm, length 10 cm) 3 times-winding cooper tape of width 2 cm , thickness 0.05 cm and length 10 cm with 2 cm interval between winded tapes. Capacitors from 2 pF to 100 pF were used, and the solenoid coil was designed for receiver only coil. RESULTS: SNR of the developed solenoid was 985 in CuSO4 0.7 g/L and 995 in rat experiment. Q-factor was 84-89 in unloaded condition and 203-206 in loaded condition. CONCLUSION: The resolution of the image obtained from solenoid was relatively higher than that of the conventional birdcage coil. In addition, the homogeneity of RF field by coil simulation was significantly excellent. The present study demonstrated that the solenoid coil could be useful to obtain small animal images with better contrast, resolution, visibility than images from birdcage.
