The optimum flow shear stress and the mass transport benefiting for construction of the tissue-engineered bone combining computational fluid dynamics
10.3760/cma.j.issn.0253-2352.2011.05.022
- VernacularTitle:适宜组织工程化骨构建的流体剪切力和物质转运速度的研究
- Author:
Deqiang LI
;
Kerong DAI
;
Tingting TANG
;
Xueyan GUO
;
Jianxi LU
;
Ailing YANG
- Publication Type:Journal Article
- Keywords:
Tissue engineering;
Mesenchymal stem cells;
Bioreactors;
Biological transport
- From:
Chinese Journal of Orthopaedics
2011;31(5):542-548
- CountryChina
- Language:Chinese
-
Abstract:
Objective To explore the optimum flow shear stress and mass transport for the construction of tissue-engineered bone.Methods The β-tricalcium phosphate (β-TCP) scaffolds seeded with human bone marrow-derived mesenchymal stem cells (HBMMSCs) were cultured in perfusion bioreactor.When the same flow rate was applied,the flow shear stress was separately 1×,2× and 3×.When the same flow shear stress was applied,the flow rates were separately 3 ml/min,6 ml/min and 9 ml/min.Cell proliferation was measured by MTT method.The construction of tissue-engineered bone was evaluated by measuring alkaline phosphatase (AKP) activity,secretion of osteopontin (OP) and osteocalcin (OC),and the mineralization of extracellular matrix (ECM).The flow shear stress and the mass transport were obtained using computational fluid dynamics.Results When the flow rate was same,the most cell proliferation was found in 2× group.The AKP activity and secretion of OC was higher in 2× and 3× groups than in those in 1× group.After 28days,the highest amount of mineralization of ECM was found in 3× group.When the flow shear stress was same,the AKP activity was highest in 6 ml/min group.After 28 days,secretion of OC and formation of mineralized ECM was highest in 3 ml/min group.When the flow rate was same,the flow shear stress was separately 0.004-0.007 Pa,0.009-0.013 Pa and 0.013-0.018 Pa.When the flow shear stress was same,the flow rate was separately 0.267-0.384 mm/s,0.521-0.765 mm/s and 0.765-1.177 mm/s.Conclusion When the tissue-engineered bone was constructed,0.013-0.018 Pa flow shear stress and 0.267-0.384 mm/s mass transport velocity could improve the construction of the tissue-engineered bone in vitro.
