Notch and metal handle broken in artificial hip joint
10.3969/j.issn.1673-8225.2009.48.028
- VernacularTitle:人工髋关节金属柄折断与槽口的关系
- Author:
Changxing LIU
;
Wanlin GUO
;
Tianwen LI
- Publication Type:Journal Article
- From:
Chinese Journal of Tissue Engineering Research
2009;13(48):9523-9525
- CountryChina
- Language:Chinese
-
Abstract:
A broken metal handle accompanied by femoral trunk fracture, which would shorten service life of handles. Therefore, it is necessary to judge whether the notch is the main reason for handle broken. Some literatures thought that the pores of sintered porous coated anatomic (PCA) porous layer produce the notch on the handle surface and the notches lead to the handle broken being incorrect. The Apex of the pore is taken for the bottom of the notch, expanding into a crack, and it should also not grow to the base-alloy, accordingly, the above conclusion is wrong. Some reports pointed out the notch, apex of the pore, will expand into the crack, but it is not associated with the broken handle. Under the sintering temperature, the grain boundary apertures be generated on the base metal surface, the aperture is expanded into the crack, which leads to handle broken in the forced area. However, neither theoretical basis, nor a case of corroboration, can prove exist of notch. Actually, the broken handle is caused by the sintering technology. The high temperature of sintering joining results in grain boundary aperture, when encounter the largest forced area and expand into crack, it will break the handle.
