Measurement of Dosimetric Parameters for Hi-ART Helical Tomotherapy Unit
- VernacularTitle:Hi-ART螺旋断层治疗机剂量学参数的测量
- Author:
Yunlai WANG
;
Xiangyan SHA
;
Xiangkun DAI
;
Lin MA
;
Linchun FENG
;
Baolin QU
- Publication Type:Journal Article
- Keywords:
Helical tomotherapy;
Percentage depth dose;
Absorbed dose;
Leaf fluence output factor
- From:
Chinese Journal of Radiation Oncology
2008;17(3):226-229
- CountryChina
- Language:Chinese
-
Abstract:
Objective To develop a measurement method of dosimetric parameters for Hi-ART tomotherapy unit. Methods Percentage depth doses and beam profiles were measured using the dedicated mini water phantom, and compared to the results of 6 MV X-ray from Primus accelerator. Following the AAPM TG51 protocol, absolute dose calibration was carried out under SSD of 85 cm at depth of 1.5 cm for field of 5 cm ×40 cm. The output linearity and reproducibility were evaluated. The output variation with the gantry rotation was also investigated using 0.6 cm3 ion chamber in cylindrical perplex phantom and on-board MVCT detectors. Leaf fluence output factors were quantified for the leaf of interest and its adjacent leaves.Results The buildup depth was around 1.0 cm. The PDD values at 10 cm for Hi-ART and Primus were 59.7% and 64.7%, respectively. Varying with the field width, the lateral and longitudinal beam profiles were not so homogeneous as the Primus fields. The measured dose rate was 848.38 cGy/min. The fitted lint(sec) ,with a relative coefficient of 0. 999. The maximum deviation and standard deviation of output were 1.6% and less than 0.5% ; The maximum deviation and standard deviation of output changed by gantry angle were 1.1% and 0.5 % , respectively. Leaf fluence output factors did not increase significantly when leaves were opened beyond the two adjacent leaves. Conclusions Hi-ART Tomotherapy unit has a very high dose output and inhomogeneous beam profiles owing to its special design of the treatment head. This may be useful in dose calculation and treatment delivery.
