The positioning accuracy study of the cone-beam computed tomography in combination with the sixdegree couch table
10.3760/cma.j.issn.1004-4221.2010.04.020
- VernacularTitle:锥形束CT联合六自由度床的校位精度分析
- Author:
Cairong HU
;
Jun LU
;
Xiuchun ZHANG
;
Junxin WU
;
Jianji PAN
- Publication Type:Journal Article
- Keywords:
Position accuracy;
Tomography,X-ray computed,cone-beam;
Six-degree couch table
- From:
Chinese Journal of Radiation Oncology
2010;19(4):340-344
- CountryChina
- Language:Chinese
-
Abstract:
Objective To scrutinize the positioning accuracy and reproducibility of the cone-beam computed tomography system in combination with the six-degree couch table (Hexapod Robot Treatment Table, HRTT). Methods The mechanical stability of the X-ray volume imaging (XVI) system was tested,in terms of the reproducibility. And the influence of the moveable parts, including the KV panel and the source arm, on the accuracy of the XVI image registration was analyzed. The accuracy between the bone and grey value registration was compared using a head-and-neck phantom. The accuracy of the HRTT for translational, rotational, and a combination of translational and rotational corrections was investigated in consecutive measurements. Results The performance of XVI system itself was stable with translational and rotational error of below 0. 4 mm and below 0. 3°, respectively. The mean position accuracy of the XVI system in combination with the HRTT summarized over all measurements was below 0. 6 mm and below 0. 4° for translational and rotational corrections, respectively. The grey value match was more accurate than the bone match. Conclusions The XVI image acquisition and registration procedure were highly reproducible.Both translational and rotational positioning errors can be corrected very precisely with the HRTT. The HRTT is therefore well suited to complement CBCT to take full advantage of position correction in six degrees of freedom for image guided radiotherapy.
