Impact of the image quality of conebeam CT on the accelerator for the Bowtie filter
10.3760/cma.j.issn.1004-4221.2010.06.020
- VernacularTitle:Bowtie滤线器对加速器锥形束CT图像质量影响
- Author:
Wei JIANG
;
Sen BAI
;
Liangqiang ZHOU
;
Guangjun LI
;
Qiangfeng XU
;
Hong QUAN
- Publication Type:Journal Article
- Keywords:
Bowtie filter;
Tomography,Conebeam;
Image quality;
Catphan phantom
- From:
Chinese Journal of Radiation Oncology
2010;19(6):548-551
- CountryChina
- Language:Chinese
-
Abstract:
Objective To estimate the impact of the image quality of conebeam CT on the accelerator for the Bowtie filter. Methods This study used the system of conebeam CT on the accelerator,and scaned the phantom of Catphan 500 in the multiplicate scanning conditions with and without the Bowtie filter. The scanning conditions were : voltage :120 kV, 100 kV, 80 kV, electricity:25 mA, 40 mA, 64 mA,time of exposure :40 MHz, collimator: M20, L20, scanning angle :358°. We transmitted the scanning data in the treatment planning systems of Philips Pinnacle 8. 0, and estimated the influence of the image quality.Results With and without the Bowtie filter, all of the images had high geometric precision, and the maximum difference of the nominal and actual distance at the horizontal, vertical and arrowy directions in the transection were 0. 50% and 0. 56% ( t = 0. 44, P ＞ 0. 05 ), 0. 44% and 0. 48% ( t = 1.01, P ＞ 0. 05 ),0. 50% and 0. 56% (t = 1.06,P ＞0. 05 ), respectively. The spatial resolution was 0. 167 cm, immutably.The ununiformity with the Bowtie filter was decreased of 28.0% -76.0% (t=2.53,P＜0. 05)、2.8%-50.0% (t= 3.02,P＜0.01 ) than those without the Bowtie filter, and the contrast-to-noise ratio was increased of 4.0% -41.6% (t=2.70,P＜0.05)、4.0% -50.0% (t=2.14,P＜0.05), using the collimators of M20 and L20, respectively. The Bowtie filter could display clearly the edge of scanning phantom, and improve the CT number of the image edge of phantom. And the linearity of CT number was also improved. Couclusions With the Bowtie filter, the image uniformity, the precision and linearity of CT number and the contrast-to-noise ratio were improved obviously, the edge artifacts were decreased, and the geometric precision and the spacial resolution did not change.
