An initial study of tracking movement of normal patellar using volume scan on sensation 320 CT
10.3760/cma.j.issn.1005-1201.2011.01.015
- VernacularTitle:320层动态容积CT对正常人髌骨运动轨迹的初步研究
- Author:
Guifeng LIU
;
Huimao ZHANG
;
Zhongli GAO
;
Haishan YANG
;
Yinghao XU
- Publication Type:Journal Article
- Keywords:
Patella;
Tracking movement;
Tomography,X-ray computed
- From:
Chinese Journal of Radiology
2011;45(1):69-72
- CountryChina
- Language:Chinese
-
Abstract:
Objective To evaluate the diagnostic value of tracking movement of normal patellar using volume scan on sensation 320 CT. Method Data of dynamic scans of 30 knees was collected using the motor function of 320 CT and retrospectively analyzed. The data of movement of the patellorfemoral joint was obtained during flexion (from 0° to 120°) within 10-sec by 320 CT from all volunteers. The 3D coordinate of the center of patella was recorded to investigate the dispose relation of patellofemoral joint.Result With the knee angle changed from 0° to 90°, the patella moved rapidly along the Y-axis direction ( sagittal plane) down about (53.87 ± 0. 45 ) mm, and then entered the plateau phase with little change.When the knee flexion reached 10°-30° ,the patellar movement along the X-axis reached the largest range of (2. 31 ±0. 52)-(3.36 ± 0. 43 ) mm, and subsequently moved to the opposite lateral direction with the maximum about (8. 53 ± 0. 44 ) mm at 120°. In the Z axis, the track initially showed plateau, and then presented a rapidly downward trend after 30°. The patellar tracking is like an outward arc during the whole knee flexion. Conclusion The motor functional imaging of 320 CT can pinpoint the patelar tracking in a fast, painless way.
