Influence of bone quality on the stress distribution for three-posterior immediately loaded implants: a three-dimensional finite element analysis
10.3760/cma.j.issn.1002-0098.2011.04.011
- VernacularTitle:下颌后牙区不同骨质内种植体即刻负载的三维有限元分析
- Author:
Xia-Yun CHEN
1
;
Song-Ling CHEN
;
Mei-Chao ZHANG
Author Information
1. 中山大学附属第三医院
- Keywords:
Dental implant,single-tooth;
Dental cementum;
Finite element analysis
- From:
Chinese Journal of Stomatology
2011;46(4):233-236
- CountryChina
- Language:Chinese
-
Abstract:
Objective To assess and compare the peri-implant stress distribution of three posterior implants under immediate loading with 4 different bone qualities using three dimensional (3D) finite element (FE) analysis. Methods A 3D finite element model representing three implants in a portion of mandible at the 654-| region was developed, and three implants received a crown each. Four types of bone qualities (B1,B2, B3 and B4) were designed for the model. Load of 100 N was applied on the occlusal surfaces of the crowns at a 45° angle to the vertical axis of the implants. Results Von Mises stresses in the peri-implant bone of4-| in bone quality from B1 to B4 were ( 13. 17 ± 9. 32), ( 12. 95 ± 9. 14), ( 15. 00 ± 9. 44 ), and(16.81 ±10.74) MPa, and those of 5-| were (15.51 ± 10.32), (14.73 ±8.96), (16.79 ±8.40), and(18. 34 ±8.45) MPa. Stress in bone quality B4 showed the highest value, followed by B3 bone, the loweststress were found in B1 and B2 bone. It was significantly different (P ＜0. 05). However, von Mises stresses in different quality of bone around 6-| [(42.45 ±25.71), (41.66 ±25.29), (42.70 ±23.24), (42.06 ±23.66) MPa] were close to each other, and were as twice or three times as those of 4-| and 5-| , irrespective of different bone qualities. Conclusions The stress distribution around implant under immediate loading was not only affected by different bone qualities, but also by the direction of loading, and the latter may have a greater impact when a severe load delivered.
