Comparison of the optical properties of pre-colored dental monolithic zirconia ceramics sintered in a conventional furnace versus a microwave oven.
- Author:
Hee Kyung KIM
1
;
Sung Hun KIM
Author Information
- Publication Type:Original Article
- Keywords: Y-TZP ceramics; Color; Microwaves; Spectrophotometry
- MeSH: Ceramics*; Clothing; Color Perception; Methods; Microwaves*; Spectrophotometry; X-Ray Diffraction
- From:The Journal of Advanced Prosthodontics 2017;9(5):394-401
- CountryRepublic of Korea
- Language:English
- Abstract: PURPOSE: The purpose of this study was to compare the optical properties of pre-colored dental monolithic zirconia ceramics of various thicknesses sintered in a microwave and those in a conventional furnace. MATERIALS AND METHODS: A2-shade of pre-colored monolithic zirconia ceramic specimens (22.0 mm × 22.0 mm) in 3 thickness groups of 0.5, 1.0, and 1.5 mm were divided into 2 subgroups according to the sintering methods (n=9): microwave and conventional sintering. A spectrophotometer was used to obtain CIELab color coordinates, and translucency parameters and CIEDE2000 color differences (ΔE 00) were measured. The relative amount of monoclinic phase (X(m)) was estimated with x-ray diffraction. The surface topography was analyzed by atomic force microscope and scanning electron microscope. Statistical analyses were conducted with two-way ANOVA (α=.05). RESULTS: There were small interaction effects on CIE L*, a*, and TP between sintering method and thickness (P<.001): L* (partial eta squared η(p)²=0.115), a* (η(p)²=0.136), and TP (η(p)²=0.206), although higher b* values were noted for microwave sintering regardless of thickness. Color differences between two sintering methods ranged from 0.52 to 0.96 ΔE(00) units. The X(m) values ranged from 7.03% to 9.89% for conventional sintering, and from 7.31% to 9.17% for microwave sintering. The microwave-sintered specimen demonstrated a smoother surface and a more uniform grain structure compared to the conventionally-sintered specimen. CONCLUSION: With reduced processing time, microwave-sintered pre-colored dental monolithic zirconia ceramics can exhibit similar color perception and translucency to those by conventional sintering.
