Effects of hydrogen peroxide pretreatment and heat activation of silane on the shear bond strength of fiber-reinforced composite posts to resin cement.
- Author:
Jung Hoon PYUN
1
;
Tae Bong SHIN
;
Joo Hee LEE
;
Kang Min AHN
;
Tae Hyung KIM
;
Hyun Suk CHA
Author Information
- Publication Type:Original Article
- Keywords: Fiber post; Hydrogen peroxide; Silane; Heat treatment; Shear strength
- MeSH: Cementation; Hot Temperature*; Hydrogen Peroxide*; Hydrogen*; Microscopy, Electron, Scanning; Resin Cements*; Shear Strength; Water
- From:The Journal of Advanced Prosthodontics 2016;8(2):94-100
- CountryRepublic of Korea
- Language:English
- Abstract: PURPOSE: To evaluate the effects of hydrogen peroxide pretreatment and heat activation of silane on the shear bond strength of fiber-reinforced composite posts to resin cement. MATERIALS AND METHODS: The specimens were prepared to evaluate the bond strength of epoxy resin-based fiber posts (D.T. Light-Post) to dual-curing resin cement (RelyX U200). The specimens were divided into four groups (n=18) according to different surface treatments: group 1, no treatment; group 2, silanization; group 3, silanization after hydrogen peroxide etching; group 4, silanization with warm drying at 80℃ after hydrogen peroxide etching. After storage of the specimens in distilled water at 37℃ for 24 hours, the shear bond strength (in MPa) between the fiber post and resin cement was measured using a universal testing machine. The fractured surface of the fiber post was examined using scanning electron microscopy. Data were analyzed using one-way ANOVA and post-hoc analysis with Tukey's HSD test (α=0.05). RESULTS: Silanization of the fiber post (Group 2) significantly increased the bond strength in comparison with the non treated control (Group 1) (P<.05). Heat drying after silanization also significantly increased the bond strength (Group 3 and 4) (P<.05). However, no effect was determined for hydrogen peroxide etching before applying silane agent (Group 2 and 3) (P>.05). CONCLUSION: Fiber post silanization and subsequent heat treatment (80℃) with warm air blower can be beneficial in clinical post cementation. However, hydrogen peroxide etching prior to silanization was not effective in this study.
