Finite Element Analysis of Effect of Key Dimension of Nitinol Stent on Its Fatigue Behaviour.
- Author:
Jianjun LI
;
Shengzhang WANG
- Publication Type:Journal Article
- MeSH:
Alloys;
Computer Simulation;
Equipment Failure Analysis;
Finite Element Analysis;
Stents
- From:
Journal of Biomedical Engineering
2015;32(2):305-310
- CountryChina
- Language:Chinese
-
Abstract:
To evaluate the fatigue behavior of nitinol stents, we used the finite element method to simulate the manufacture processes of nitinol stents, including expanding, annealing, crimping, and releasing procedure in applications of the clinical treatments. Meanwhile, we also studied the effect of the crown area dimension of stent on strain distribution. We then applied a fatigue diagram to investigate the fatigue characteristics of nitinol stents. The results showed that the maximum strain of all three stent structures, which had different crown area dimensions under vessel loads, located at the transition area between the crown and the strut, but comparable deformation appeared at the inner side of the crown area center. The cause, of these results was that the difference of the area moment of inertia determined by the crown dimension induced the difference of strain distribution in stent structure. Moreover, it can be drawn from the fatigue diagrams that the fatigue performance got the best result when the crown area dimension equaled to the intermediate value. The above results proved that the fatigue property of nitinol stent had a close relationship with the dimension of stent crown area, but there was no positive correlation.
