Electrochemical Characteristics of Nanotubular Ti-25Nb-xZr Ternary Alloys for Dental Implant Materials.
10.5856/JKDS.2017.10.1.10
- Author:
In Seop BYEON
1
;
Seon Young PARK
;
Han Cheol CHOE
Author Information
1. Department of Dental Materials, Research Center of Nano-Interface Activation for Biomaterials & Research Center for Oral Disease Regulation of the Aged, College of Dentistry, Chosun University, Gwangju, Korea. hcchoe@chosun.ac.kr
- Publication Type:Original Article
- Keywords:
β-type titanium;
Electrochemical methods;
Nanotubes;
Needle-like;
Surface morphology;
Ti-25Nb-xZr
- MeSH:
Alloys*;
Argon;
Atmosphere;
Corrosion;
Dental Implants*;
Freezing;
Ice;
Nanotubes;
Niobium;
Spectrum Analysis;
Titanium;
Water;
Wettability;
Zirconium
- From:Journal of Korean Dental Science
2017;10(1):10-21
- CountryRepublic of Korea
- Language:English
-
Abstract:
PURPOSE: The purpose of this study was to investigate the electrochemical characteristics of nanotubular Ti-25Nb-xZr ternary alloys for dental implant materials. MATERIALS AND METHODS: Ti-25Nb-xZr alloys with different Zr contents (0, 3, 7, and 15 wt.%) were manufactured using commercially pure titanium (CP-Ti), niobium (Nb), and zirconium (Zr) (99.95 wt.% purity). The alloys were prepared by arc melting in argon (Ar) atmosphere. The Ti-25Nb-xZr alloys were homogenized in Ar atmosphere at 1,000℃ for 12 hours followed by quenching into ice water. The microstructure of the Ti-25Nb-xZr alloys was examined by a field emission scanning electron microscope. The phases in the alloys were identified by an X-ray diffractometer. The chemical composition of the nanotube-formed surfaces was determined by energy-dispersive X-ray spectroscopy. Selforganized TiO₂ was prepared by electrochemical oxidation of the samples in a 1.0 M H₃PO₄+0.8 wt.% NaF electrolyte. The anodization potential was 30 V and time was 1 hour by DC supplier. Surface wettability was evaluated for both the metallographically polished and nanotube-formed surfaces using a contact-angle goniometer. The corrosion properties of the specimens were investigated using a 0.9 wt.% aqueous solution of NaCl at 36℃±5℃ using a potentiodynamic polarization test. RESULT: Needle-like structure of Ti-25Nb-xZr alloys was transform to equiaxed structure as Zr content increased. Nanotube formed on Ti-25Nb-xZr alloys show two sizes of nanotube structure. The diameters of the large tubes decreased and small tubes increased as Zr content increased. The lower contact angles for nanotube formed Ti-25NbxZr alloys surfaces showed compare to non-nanotube formed surface. The corrosion resistance of alloy increased as Zr content increased, and nanotube formed surface showed longer the passive regions compared to non-treatment surface. CONCLUSION: It is confirmed that corrosion resistance of alloy increased as Zr content increased, and nanotube formed surface has longer passive region compared to without treatment surface.
