Pretreatment of oil palm residues by dilute alkali for cellulosic ethanol production.
- Author:
Haiyan ZHANG
1
;
Yujie ZHOU
;
Jinping LI
;
Lingmei DAI
;
Dehua LIU
;
Jian'an ZHANG
;
Yuen May CHOO
;
Soh Kheang LOH
Author Information
1. Institute of Fine Chemical, Taiyuan University of Technology, Taiyuan 030024, Shanxi, China.
- Publication Type:Journal Article
- MeSH:
Alkalies;
chemistry;
Biofuels;
Ethanol;
metabolism;
Fermentation;
Lignin;
chemistry;
Palm Oil;
Plant Oils
- From:
Chinese Journal of Biotechnology
2013;29(4):490-500
- CountryChina
- Language:Chinese
-
Abstract:
In the study, we used oil palm residues (empty fruit bunch, EFB) as raw material to produce cellulosic ethanol by pretreatment, enzymatic hydrolysis and fermentation. Firstly, the pretreatment of EFB with alkali, alkali/hydrogen peroxide and the effects on the components and enzymatic hydrolysis of cellulose were studied. The results show that dilute alkali was the suitable pretreatment method and the conditions were first to soak the substrate with 1% sodium hydroxide with a solid-liquid ratio of 1:10 at 40 degrees C for 24 h, and then subjected to 121 degrees C for 30 min. Under the conditions, EFB solid recovery was 74.09%, and glucan, xylan and lignin content were 44.08%, 25.74% and 13.89%, respectively. After separated with alkali solution, the pretreated EFB was washed and hydrolyzed for 72 h with 5% substrate concentration and 30 FPU/g dry mass (DM) enzyme loading, and the conversion of glucan and xylan reached 84.44% and 89.28%, respectively. We further investigated the effects of substrate concentration and enzyme loading on enzymatic hydrolysis and ethanol batch simultaneous saccharification and fermentation (SSF). The results show that when enzyme loading was 30 FPU/g DM and substrate concentration was increased from 5% to 25%, ethanol concentration were 9.76 g/L and 35.25 g/L after 72 h fermentation with Saccharomyces cerevisiae (inoculum size 5%, V/V), which was 79.09% and 56.96% of ethanol theory yield.
