Effect of universal primer on shear bond strength between resin cement and restorative materials.
10.4047/jkap.2012.50.2.112
- Author:
Nahong KIM
1
;
June Sung SHIM
;
Hong Suk MOON
;
Keun Woo LEE
Author Information
1. Department of Dentistry, Graduate School, Yonsei University, Seoul, Korea. udprostho@yuhs.ac
- Publication Type:Original Article
- Keywords:
Universal primer;
Silane;
Phosphate monomer;
Resin cement;
Shear bond strength
- MeSH:
Alloys;
Ceramics;
Collodion;
Dental Materials;
Glass;
Hypogonadism;
Metals;
Methacrylates;
Mitochondrial Diseases;
Ophthalmoplegia;
Polymers;
Resin Cements;
Thiones;
Zirconium
- From:The Journal of Korean Academy of Prosthodontics
2012;50(2):112-118
- CountryRepublic of Korea
- Language:Korean
-
Abstract:
PURPOSE: The purpose of this study was to evaluate the difference in shear bonding strength between resin cements to dental materials when a universal primer (Monobond plus) was applied in place of a conventional primer. MATERIALS AND METHODS: Four groups of testing materials: gold alloy (Argedent Euro, n = 16), non precious metal (T-4, n = 20), zirconia (Cercon, n = 20) and glass ceramic (IPS e.max press, n = 20), were fabricated into discs, which were embedded in an acrylic resin matrix. The gold alloy specimens were airborne-particle abraded, 8 of the specimens were coated with Metal primer II, while the remaining 8 specimens were coated with Monobond plus. The non precious and zirconia specimen were airborne-particle abraded then, the control group received Alloy primer coating, while the other was coated with Monobond plus. Glass ceramic specimens were etched. 10 specimens were coated with Monobond-S and the remaining specimens were coated using Monobond plus. On top of the surface, Multilink N was polymerized in a disc shape. All of the specimens were thermal cycled before the shear bonding strength was measured. Statistical analysis was done with Two sample t-test or Mann-Whitney U test (alpha=.05). RESULTS: There were no significant differences in bonding strength depending on the type of primer used in the gold alloy and glass ceramic groups (P>.05), however, the bonding strengths of resin cements to non precious metal and zirconia groups, were significantly higher when the alloy primer was used (P<.05). CONCLUSION: Within the limitations of this study, improvement of universal primers which can be applied to all types of restorations is recommended to precious metals and zirconia ceramics. But, the bond strengths of non precious metals and zirconia ceramics were significantly lower when compared to a 10-MDP primer. More research is needed to apply universal primers to all types of restorations.
