In-vitro study on the accuracy of a simple-design CT-guided stent for dental implants.
10.5624/isd.2012.42.3.139
- Author:
Young June HUH
1
;
Bo Ram CHOI
;
Kyung Hoe HUH
;
Won Jin YI
;
Min Suk HEO
;
Sam Sun LEE
;
Soon Chul CHOI
Author Information
1. Department of Oral and Maxillofacial Radiology and Dental Research Institute, School of Dentistry, Seoul National University, Seoul, Korea. raychoi@snu.ac.kr
- Publication Type:In Vitro ; Original Article
- Keywords:
Computer-Assisted Diagnosis;
Dental Implant;
Tomography, X-Ray Computed;
In Vitro
- MeSH:
Axis, Cervical Vertebra;
Dental Implants;
Diagnosis, Computer-Assisted;
Mandible;
Mandrillus;
Plastics;
Stents;
Tomography, X-Ray Computed
- From:Imaging Science in Dentistry
2012;42(3):139-146
- CountryRepublic of Korea
- Language:English
-
Abstract:
PURPOSE: An individual surgical stent fabricated from computed tomography (CT) data, called a CT-guided stent, would be useful for accurate installation of implants. The purpose of the present study was to introduce a newly developed CT-guided stent with a simple design and evaluate the accuracy of the stent placement. MATERIALS AND METHODS: A resin template was fabricated from a hog mandible and a specially designed plastic plate, with 4 metal balls inserted in it for radiographic recognition, was attached to the occlusal surface of the template. With the surgical stent applied, CT images were taken, and virtual implants were placed using software. The spatial positions of the virtually positioned implants were acquired and implant guiding holes were drilled into the surgical stent using a specially designed 5-axis drilling machine. The surgical stent was placed on the mandible and CT images were taken again. The discrepancy between the central axis of the drilled holes on the second CT images and the virtually installed implants on the first CT images was evaluated. RESULTS: The deviation of the entry point and angulation of the central axis in the reference plane were 0.47+/-0.27 mm, 0.57+/-0.23 mm, and 0.64+/-0.16degrees, 0.57+/-0.15degrees, respectively. However, for the two different angulations in each group, the 20degrees angulation showed a greater error in the deviation of the entry point than did the 10degrees angulation. CONCLUSION: The CT-guided template proposed in this study was highly accurate. It could replace existing implant guide systems to reduce costs and effort.
