Theoretical axial wall angulation for rotational resistance form in an experimental-fixed partial denture.
- Author:
John Francis BOWLEY
1
;
Elizabeth Krall KAYE
;
Raul Isidro GARCIA
Author Information
- Publication Type:Original Article
- Keywords: Fixed partial denture; Resistance form
- MeSH: Denture, Partial*; Denture, Partial, Fixed
- From:The Journal of Advanced Prosthodontics 2017;9(4):278-286
- CountryRepublic of Korea
- Language:English
- Abstract: PURPOSE: The aim of this study was to determine the influence of long base lengths of a fixed partial denture (FPD) to rotational resistance with variation of vertical wall angulation. MATERIALS AND METHODS: Trigonometric calculations were done to determine the maximum wall angle needed to resist rotational displacement of an experimental-FPD model in 2-dimensional plane. The maximum wall angle calculation determines the greatest taper that resists rotation. Two different axes of rotation were used to test this model with five vertical abutment heights of 3-, 3.5-, 4-, 4.5-, and 5-mm. The two rotational axes were located on the mesial-side of the anterior abutment and the distal-side of the posterior abutment. Rotation of the FPD around the anterior axis was counter-clockwise, Posterior-Anterior (P-A) and clockwise, Anterior-Posterior (A-P) around the distal axis in the sagittal plane. RESULTS: Low levels of vertical wall taper, ≤ 10-degrees, were needed to resist rotational displacement in all wall height categories; 2–to–6–degrees is generally considered ideal, with 7–to–10–degrees as favorable to the long axis of the abutment. Rotation around both axes demonstrated that two axial walls of the FPD resisted rotational displacement in each direction. In addition, uneven abutment height combinations required the lowest wall angulations to achieve resistance in this study. CONCLUSION: The vertical height and angulation of FPD abutments, two rotational axes, and the long base lengths all play a role in FPD resistance form.