Mechanical and interfacial characterization of laser welded Co-Cr alloy with different joint configurations.
- Author:
John KOKOLIS
1
;
Makdad CHAKMAKCHI
;
Antonios THEOCHAROPOULOS
;
Anthony PROMBONAS
;
Spiros ZINELIS
Author Information
- Publication Type:Original Article
- Keywords: Laser welding; Co-Cr alloys; SEM/EDX; Mechanical properties
- MeSH: Alloys*; Joints*; Tensile Strength; Welding
- From:The Journal of Advanced Prosthodontics 2015;7(1):39-46
- CountryRepublic of Korea
- Language:English
- Abstract: PURPOSE: The mechanical and interfacial characterization of laser welded Co-Cr alloy with two different joint designs. MATERIALS AND METHODS: Dumbbell cast specimens (n=30) were divided into 3 groups (R, I, K, n=10). Group R consisted of intact specimens, group I of specimens sectioned with a straight cut, and group K of specimens with a 45degrees bevel made at the one welding edge. The microstructure and the elemental distributions of alloy and welding regions were examined by an SEM/EDX analysis and then specimens were loaded in tension up to fracture. The tensile strength (TS) and elongation (epsilon) were determined and statistically compared among groups employing 1-way ANOVA, SNK multiple comparison test (alpha=.05) and Weibull analysis where Weibull modulus m and characteristic strength sigmaomicron were identified. Fractured surfaces were imaged by a SEM. RESULTS: SEM/EDX analysis showed that cast alloy consists of two phases with differences in mean atomic number contrast, while no mean atomic number was identified for welded regions. EDX analysis revealed an increased Cr and Mo content at the alloy-joint interface. All mechanical properties of group I (TS, epsilon, m and sigmaomicron) were found inferior to R while group K showed intermediated values without significant differences to R and I, apart from elongation with group R. The fractured surfaces of all groups showed extensive dendritic pattern although with a finer structure in the case of welded groups. CONCLUSION: The K shape joint configuration should be preferred over the I, as it demonstrates improved mechanical strength and survival probability.
