The influence of composite resin restoration on the stress distribution of notch shaped noncarious cervical lesion; A three dimensional finite element analysis study.
10.5395/JKACD.2007.32.1.069
- Author:
Chae Kyung LEE
1
;
Jeong Kil PARK
;
Hyeon Cheol KIM
;
Sung Gwan WOO
;
Kwang Hoon KIM
;
Kwon SON
;
Bock HUR
Author Information
1. Department of Conservative dentistry, College of Dentistry, Pusan National University, Korea. bhur@pusan.ac.kr
- Publication Type:Original Article
- Keywords:
Notch shaped cavity;
Class 5 restoration;
Stress distribution;
Finite element analysis;
Hybrid composite resin;
Flowable composite resin
- MeSH:
Adhesives;
Bicuspid;
Finite Element Analysis*;
Tooth;
Tooth Cervix
- From:Journal of Korean Academy of Conservative Dentistry
2007;32(1):69-79
- CountryRepublic of Korea
- Language:English
-
Abstract:
The purpose of this study was to investigate the effects of composite resin restorations on the stress distribution of notch shaped noncarious cervical lesion using three-dimensional (3D) finite element analysis (FEA). Extracted maxillary second premolar was scanned serially with Micro-CT (SkyScan1072; SkyScan, Aartselaar, Belgium). The 3D images were processed by 3D-DOCTOR (Able Software Co., Lexington, MA, USA). ANSYS (Swanson Analysis Systems, Inc., Houston, USA) was used to mesh and analyze 3D FE model. Notch shaped cavity was filled with hybrid or flowable resin and each restoration was simulated with adhesive layer thickness (40 microM). A static load of 500 N was applied on a point load condition at buccal cusp (loading A) and palatal cusp (loading B). The principal stresses in the lesion apex (internal line angle of cavity) and middle vertical wall were analyzed using ANSYS. The results were as follows 1. Under loading A, compressive stress is created in the unrestored and restored cavity. Under loading B, tensile stress is created. And the peak stress concentration is seen at near mesial corner of the cavity under each load condition. 2. Compared to the unrestored cavity, the principal stresses at the cemeto-enamel junction (CEJ) and internal line angle of the cavity were more reduced in the restored cavity on both load conditions. 3. In teeth restored with hybrid composite, the principal stresses at the CEJ and internal line angle of the cavity were more reduced than flowable resin.
