A Study On The Tensile Strength Between Metal Denture Base And Relining Materials.
- Author:
Joon Seok LEE
;
Ju Hwan LIM
;
In Ho CHO
- Publication Type:Original Article
- MeSH:
Adhesives;
Alloys;
Denture Bases*;
Dentures*;
Oral Health;
Prosthodontics;
Tensile Strength*;
Water
- From:The Journal of Korean Academy of Prosthodontics
2000;38(1):1-11
- CountryRepublic of Korea
- Language:Korean
-
Abstract:
Relining and rebasing are essential for long-term success and oral health in removable prosthodontics. Major features of failures between metal base and relining resins are adhesive failure due to lack of chemical bonding. The purpose of this study was to find a better metal primer and metal surface treatment method that enhance the bonding strength with relining resin materials. The surfaces of ticonium alloys were treated with 25micrometer sandblasting (Group A), stone wheel (Group B), stone wheel and EZ oxisor (Group C), 75micrometer sandblasting (Group D) and EZ oxisor application after 75micrometer sandblasting (Group E). They were subdivided into no primer application (Group I), MR bond application (Group II) and Metafast bonding liner (Group III). Then specimens were completed though being bonded with relining resins. The specimens were stored in 38degrees C water for 48 hours and tensile strength was measured using the universal testing machine. The results were as follows, 1. Primer application groups showed higher bond strength than no primer application group(p<0.05). 2. In comparison with primer application groups, MR bond group showed higher bond strength than Meta fast bonding liner application group(p<0.05). 3. In comparison with surface treatment methods. Bond strengths of group A and B were significantly different with group C, D, and E, and group C were significantly different with group D, and E in no primer application group(p<0.05). In primer application groups, group A, B, C were significantly different with group D and E(p<0.05). According to results of this study, Metal primer application and metal surface roughening were considered to be advantageous for relining of metal base dentures.
