A STUDY ON THE TENSILE STRENGTH OF REINFORCED VENEERING COMPOSITE RESINS FOR CROWN.
- Author:
Seung Geun AHN
1
;
Dong Wan KANG
Author Information
1. Department of Prosthodontics and Institute of Oral Bio Science, School of Dentistry, Korea.
- Publication Type:Original Article
- Keywords:
Veneering composites;
Tensile strength;
Weibull analysis;
FTIR
- MeSH:
Composite Resins*;
Crowns*;
Fourier Analysis;
Fungi;
Glass;
Polytetrafluoroethylene;
Silicone Elastomers;
Spectroscopy, Fourier Transform Infrared;
Spectrum Analysis;
Tensile Strength*
- From:The Journal of Korean Academy of Prosthodontics
2000;38(2):226-241
- CountryRepublic of Korea
- Language:Korean
-
Abstract:
Recently a new generation of crown and bridge veneering resins containing submicron glass fillers was introduced. These ultrasmall particle hybrid composite materials distinguish themselves, compared with conventional microfill crown and bridge resins, through improved mechanical properties. It is claimed that these composites are suitable for metal free crowns and even bridges using fiber reinforcement. The purpose of this study was to evaluate the effect of thermal cycling on the tensile strength of the following veneering composites: Artglass(Heraeus Kulzer Co., Wehrheim, Germany), Estenia(Kuraray Co., Japan), Sculpture(Jeneric Pentron Co., Wallingford, U.S.A.), and Targis(Ivoclar Co., Schaan Liechenstein). According to manufacturer' s instructions, rectangular tensile test specimens measuring 1.5 x 2.0 x 4.5 mm were made using a teflon mold. Whole specimens were divided into two groups. One group was dried in a desiccator at 25C for 10 days, and another group was subjected to thermal cycling(10,000 x) in water(5/55 10. All test specimens were placed in a universal testing machine and loaded until fracture with a crosshead speed of 0.5mm/min. Weibull analysis and Tukey s test were used to analyze the data. The fracture surfaces of specimens were observed in SEM and the aliphatic C=C absorbance peak of Estenia and Targis resin was analyzed using Fourier transform infrared(FTIR) spectroscopy. Within the limitations imposed in this study, the following conclusions can be drawn 1. Both in drying condition and, thermal cycling condition, the highest tensile strength was observed in Estenia testing group(p<0.05). 2. The strength data were fit to single-mode Weibull distribution, and the Weibull modulus of all veneering composite resin specimens increased after thermal cycling treatment. 3. After thermal cycling test, the highest tensile strength was observed in the Estenia group, and the lowest value was observed in the Targis group. The tensile strength values showed the significant differences between each group(p<0.05). 4. The aliphatic C = C absorbance peak of Estenia and Targis resin was decreased after light curing, and there was no distinct change after thermal cycling.
