Optimal combination of 3-component photoinitiation system to increase the degree of conversion of resin monomers.
10.5395/JKACD.2011.36.4.313
- Author:
Chang Gyu KIM
1
;
Ho Jin MOON
;
Dong Hoon SHIN
Author Information
1. Department of Conservative Dentistry, Dankook University College of Dentistry, Institute of Dental Science, Cheonan, Korea. donyshin@dankook.ac.kr
- Publication Type:Original Article
- Keywords:
Camphoroquinone;
Concentration;
Degree of conversion;
DMAEMA;
OPPI;
Photoinitiator
- MeSH:
Ethylamines;
Methacrylates;
Polymers;
Terpenes
- From:Journal of Korean Academy of Conservative Dentistry
2011;36(4):313-323
- CountryRepublic of Korea
- Language:Korean
-
Abstract:
OBJECTIVES: This study investigated the optimal combination of 3-component photoinitiation system, consisting of CQ, p-octyloxy-phenyl-phenyl iodonium hexafluoroantimonate (OPPI), and 2-dimethylaminoethyl methacrylate (DMAEMA) to increase the degree of conversion of resin monomers, and analyze the effect of the ratio of the photoinitiator to the co-initiator. MATERIALS AND METHODS: Each photoinitiators (CQ and OPP) and co-initiator (DMAEMA) were mixed in three levels with 0.2 wt.% (low concentration, L), 1.0 wt.% (medium concentration, M), and 2.0 wt.% (high concentration, H). A total of nine groups using the Taguchi method were tested according to the following proportion of components in the photoinitiator system: LLL, LMM, LHH, MLM, MMH, MHL, HLH, HML, HHM. Each monomer was polymerized using a quartz-tungsten-halogen curing unit (Demetron 400, USA) for 5, 20, 40, 60, 300 sec and the degree of conversion (DC) was determined at each exposure time using FTIR. RESULTS: Significant differences were found for DC values in groups. MMH group and HHM group exhibited greater initial DC than the others. No significant difference was found with the ratio of the photoinitiators (CQ, OPPI) to the co-initiator (DMAEMA). The concentrations of CQ didn't affect the DC values, but those of OPPI did strongly. CONCLUSIONS: MMH and HHM groups seem to be best ones to get increased DC. MMH group is indicated for bright, translucent color and HHM group is good for dark, opaque colored-resin.
