Mechanical properties of tin coated film with various coating thickness on titanium alloy.
- Author:
Jae Yun LEE
1
;
Dong Joon OH
;
Hee Jung KIM
;
Chae Heon CHUNG
Author Information
1. Department of Prosthodontics, College of Dentistry, Chosun University, Korea. jhajung@mail.chosun.ac.kr
- Publication Type:Original Article
- Keywords:
Titanium nitride(TiN);
Adhesion strength;
Wear resistance;
Surface roughness
- MeSH:
Alloys*;
Friction;
Tin*;
Titanium*
- From:The Journal of Korean Academy of Prosthodontics
2007;45(5):675-686
- CountryRepublic of Korea
- Language:Korean
-
Abstract:
STATEMENT OF PROBLEM: Titanium nitride(TiN) coatings are the most general and popular coating method and used to improve the properties of metallic surface for industrial PURPOSEs. When TiN coating applied to the abutment screw, frictional resistance would be reduced, as a results, the greater preload and prevention of the screw loosening could be expected. PURPOSE: The purpose of this study was to investigate mechanical properties of TiN coated film of various coating thickness on the titanium alloy surface and to evaluate proper coating thickness. MATERIAL AND METHOD: 95 Titanium alloy (Ti-6Al-4V) discs of 15 mm in diameter and 3 mm in thickness were prepared for TiN coating and divided into 7 groups in this study. Accoding to coating deposition time (CDT) with TiN by using Arc ion plating, were divided into 7 groups : Group A (CDT 30min), Group B (CDT 60min), Group C (CDT 90min), Group D (CDT 120min), Group E (CDT 150min), Group F(CDT 180min) and Group G (no CDT) as a control group. TiN coating surface was observed with Atomic Force Microscope(AFM), field emission scanning electron microscopy(FE-SEM) and examined with scratch tester, wear tester. Result: 1. Coating thickness for each coated group was increased in proportion to coating deposition time. 2. Surface of all coated groups except Group A was homogeneous and smooth. However, surface of none coated Group G had scratch. 3. Adhesion strength for each coated group was increased in proportion to coating deposition time. 4. Wear resistance for each coated group was increased in proportion to coating deposition time. 5. Surface roughness in Group A, B, C was increased in proportion to coating deposition time. But, surface roughness in Group D, E, F was showed decreased tendency in proportion to coating deposition time. CONCLUSION: According to coating deposition time, mechanical properties of TiN coated film were changed. It was considered that 120 minutes coating deposition time (1.32micrometer in coating thickness) is necessary.
